Maytag W10312954A Use And Care Manual page 9

CYCLE GUIDE — TIMED CYCLES
Settings and options shown in bold are default settings for that cycle.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
Adjusting drying time on Timed Cycles
When you select a Timed Cycle, the default
time appears in the display. Use the + and –
+ buttons to increase or decrease the time in 1
minute increments. Press and hold to change
the time in 5 minute increments.
-
The maximum dry time is 100 minutes.
temp level dryness leve
Cycle:
items to dry:
Small loads and Small Load
sportswear
Any load Timed Dry
NOTe: Select Air
Only to dry foam,
rubber, plastic, or
heat-sensitive
fabrics.
Or Wrinkle Prevent with Steam (on some models). Wrinkle Prevent with Steam is available only with High and Medium Drying Temperature settings
†
CYCLE GUIDE — STEAM CYCLES
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, remove odors, and refresh fabrics.
items to
Cycle:
refresh:
Shirts, blouses, Auto
and slacks Refresh
Mixed Loads Custom
Refresh
(on some
models)
† Or Wrinkle Prevent with Steam (on some models). Wrinkle Prevent with Steam is available only with High and Medium Drying Temperature settings.
load Size recommendations
For best results, follow the load size recommendations noted for
each cycle.
Small load: Fill the dryer drum with 3-4 items,
not more than 1/4 full.
drying
default
Temperature: Time:
High 18
Medium
Low
Extra Low
Air Only
High 40
Medium
Low
Extra Low
Air Only
drying default
Temperature: Time:
Medium 15
22
High
Medium
Selecting the drying Temperature
A High heat setting may be used for drying heavyweight items
such as towels and work clothes.
A Low to Medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no heat (air dry) setting for foam, rubber, plastic, or heat-
sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTe: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Available
Options:
Wrinkle Prevent For small loads of 3-4 items.
†
Wrinkle Prevent Use to dry items to a damp level for items that do
†
not require an entire drying cycle. Select a drying
temperature based on the type of fabrics in your
load. If you are unsure of the temperature to select
for a load, select the lower setting rather than the
higher setting.
Available
Options:
Wrinkle Prevent † Use to reduce odors and light wrinkles from small
Reduce Static loads of dry items. Dry time will automatically adjust
when the load size is sensed. Cycle run time cannot
be manually adjusted. Do not add dryer sheets.
Wrinkle Prevent Use to reduce wrinkles, including from loads left in
†
Reduce Static the dryer too long. For larger loads, you may add
additional time up to 50 minutes in 5 minute
increments using the Timed Dry adjust buttons.
Temperature is selectable. Do not add dryer sheets.
Medium load: Fill the dryer drum up to about 1/2 full.
large load: Fill the dryer drum up to about 3/4 full.
Do not overload. Items need to tumble freely.
Cycle details:
Cycle details:
9