Table of Contents
Advertisement
1.
Introduction
We provide our customers with tools to improve product quality, increase safety and hygiene in the
manufacturing process, and reduce operating costs. This manual is an extension of our commitment to
the success of our customers and the safe, optimal performance of our equipment.
1.1
Using This Manual
The purpose of this manual is to provide equipment-specific information that can be used to train
personnel and generate in-house procedures for safely operating and maintaining this equipment. This
manual is intended for users with a basic understanding of industrial/automated equipment.
The information within this manual is not intended to replace good judgement and personal
responsibility.
1.1.1
Symbols
The following symbols are used in this manual to identify information on hazards and
prevention, as well as protection of the equipment.
DANGER : Indicates a hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING : Indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION : Indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
NOTICE : Indicates a practice that is not related to personal injury.
1.1.2
Terms and Definitions
The list below contains common terms and abbreviations used in this manual, along with
definitions.
Term
Supplier
User, Owner
Personnel, Operator
Hazard
In-house
PPE
ANSI
OSHA
Definition
Equipment manufacturer
Individual or corporation that utilizes
and/or owns the equipment
Individual employed on behalf of or by
the user/owner
Potential cause of harm
Conducted from within your organization
Personal Protective Equipment
Approved American National Standard
Occupational Safety & Health
Administration
REV I | 8/6/19
3
Advertisement
Table of Contents
