Table of Contents
Advertisement
d. Facing rear outside of the frame, re-install nuts (on back of frame) holding safety chain to
frame.
e. If FLT hand valve was removed from bucket, fasten FLT hand valve to bucket.
7.2
Operation
WARNING: If the caster package is installed on the FLT, the FLT unit should be lowered to the floor
(casters raised) before operation.
CAUTION: Casters are only for use in moving FLT when bucket is EMPTY.
CAUTION: Test caster system before using.
7.2.1
Hand Valve Operation
Hand valve positions include:
•
C1 - Deflates caster airbags, lowering FLT (casters up)
•
N - Holds casters in place when air supply is removed for movement of FLT
•
C2 - Inflates caster airbags, raising FLT (casters down)
REV I | 8/6/19
14
Advertisement
Table of Contents
