Download Print this page
Steve Silver TA600CB Assembly Instruction

Steve Silver TA600CB Assembly Instruction

Tahoe counter bench 57” x 15” x 24”

Advertisement

Quick Links

Your furniture purchase is an investment. Here are a few tips to maximize the lifetime of your furniture with a
minimal amount of effort. Properly caring for your furniture can help ensure that it looks great year after year.
Wood Furniture Maintenance:
-
Always dust, wipe, and clean with the grain of the
wood.
-
Dust with a soft cloth. Dust will scratch the
furniture surface if not removed properly.
-
If a polished surface becomes cloudy, rub it with a
cloth dipped in a solution of one tablespoon
vinegar to one quart of water. Rub softly with the
grain until the surface is completely dry.
-
Soap and water are not advisable for wood
surfaces. Water can penetrate the finish and raise
the grain on wood, causing damage.
-
Remember to change dusting cloths frequently as
dirty cloths may scratch your furniture's surface.
The Enemies of Wood:
-
Moisture is wood's worst enemy. Liquid spills
should be gently wiped up immediately. Coasters
should be used under all beverages.
-
Do not allow rubber or vinyl materials to lie on the
furniture. Chemicals in rubber may leave a stain.
Put a strip of felt or leather under accessories that
have rubber or vinyl.
-
Heat creates a chemical change in the furniture's
finish, which may result in a white spot. Use
protective pads under hot dishes, appliances, etc.
-
Sunlight's ultraviolet rays can damage the finish
of furniture. Do not place furniture directly
against a heater or radiator and do not place in the
path of hot streams of air from central heating.
This will cause extreme localized drying of the
wood.
ITEM # TA600CB
TAHOE COUNTER BENCH
57" X 15" X 24"
Marble Top Maintenance:
The surface of the marble on your table has been
polished andsealed to create a generally non-porous
surface. The stone has many natural characteristics
including veining, hairline cracks, and color variations,
which make up the stone's beauty.
To maintain the beauty of your marble:
-
Protect surfaces from scratching, staining and
etching by:
Keeping them free of debris or sharp
objects.
Wiping up spills immediately
Avoiding contact with chemicals
(particularly acid-based materials)
-
Clean with PH neutral products or those
especially formulated for use on stone.
-
It is not recommended to use a water-based
solvent for dark marble as it will remove the
polish from the surface.
Caring for the Fabric on Upholstered Furniture:
-
Frequent vacuuming of the entire upholstered
area will prevent dust from settling into the fibers.
-
Professional cleaning is always recommended for
all upholstered pieces.
-
Do not use cleaning products containing
brightening agents.

Advertisement

loading
Need help?

Need help?

Do you have a question about the TA600CB and is the answer not in the manual?

Questions and answers

Summary of Contents for Steve Silver TA600CB

  • Page 1 ITEM # TA600CB TAHOE COUNTER BENCH 57” X 15” X 24” Your furniture purchase is an investment. Here are a few tips to maximize the lifetime of your furniture with a minimal amount of effort. Properly caring for your furniture can help ensure that it looks great year after year.
  • Page 2 ITEM # TA600CB Assembly Instruction Put all screws in loosely at first. Do not tighten screws & bolts until the entire item is completely assembled. Note: More than 2 people assemble required STEP#2: Tighten the bolts to lock the legs as shown STEP# 1: Put the Legs(2)toWooden Top(1).
  • Page 3 Hardware Pack # PTA600CBH 5 MM 1 PC. 25 X 8 MM 18 PCS. 9 MM 18 PCS. 8 X 20 MM 18 PCS. 40 X 40 X 5 MM 4 PCS 100 X 40 X 5 MM 2PCS...
  • Page 4 PARTS FOR TA600CB COMPLETE HARDWARE # PTA600CBH LEG PANEL STRETCHER PTA600CBLP PTA600CBS LEVELER PTA600CBLEV PRODUCT DETAILS BENCH TOP ACACIA WOOD LEGS ACACIA WOOD STRETCHER IRON LEVELER PLASTIC + IRON SEAT HEIGHT 24” SEAT DEPTH 15” PRODUCT SIZE 57” X 15” X 24'' CARTON SIZE 60.50”...
  • Page 5 Steve Silver Company Dining Chairs Assembly Troubleshooting Guide The most important element of correct chair assembly is to tighten the bolts as directed. Prematurely tightening the bolts can lead to numerous issues and will lengthen the assembly time. Listed below are the most common issues in chair assembly and their easy solutions.