Mark Levinson N 326S Owner's Manual page 18

Getting Started
1-10
4. Reconnect the Nº326S and all associated components to
electrical outlets. Then, power on the Nº326S and all associated
components. It is recommended to power all power amplifiers
on last.
5. Rotate the Nº326S front panel select knob or press the remote
control select ± buttons to select the Nº326S input that
corresponds to the Nº326S stereo input connectors selected in
step 2.
• The Nº326S front panel display indicates the name and
volume level of the selected input.
• Factory-default input names correspond to their assigned
stereo input connectors. For instance, Input 1 is assigned
to the stereo input connectors labeled 1, Input 2 is assigned
to the stereo input connectors labeled 2, and so on.
Mark Levinson