Marantz SR8000 User Manual page 21

2. FUCTION SELECT & SURROUND MODE
When a function selector button or surround mode button is pressed
VIDEO: Displays the current video source. When DSS/TV,
LD, DVD, VCR or AUX is selected with the function
selector, both AUDIO and VIDEO shows the same
name.
AUDIO: Displays the current analog audio input source.
DIGITAL: Displays the current digital input source.
SURR-MODE: Displays the current Surround mode as follows;
AUTO, DOLBY, DTS CINEMA, DTS MUSIC, HALL
MATRIX, MOVIE, 5-STEREO , STEREO, S=DIRECT,
or 6CH-INPUT.
HT-EQ : Displays the current status of the Home Theater-EQ
function as ON or OFF.
ＶＩＤＥＯ ： ＤＶＤ
ＡＵＤＩＯ ： ＤＶＤ
ＤＩＧＩＴＡＬ ： ＤＩＧ−１
ＳＵＲＲ−ＭＯＤＥ ： ＡＵＴＯ
ＨＴ−ＥＱ ： ＯＦＦ
3. MASTER VOLUME CONTROL
Displayed when the MASTER volume is varied or a button of the
remote handset is pressed.
The box display indicates the 0 dB level with a solid box " ".
ＭＡＳＴＥＲ ＶＯＬＵＭＥ
- - - - - - - - - - - - - - - - - - - - - -
4. MUTE
When the MUTE button is pressed on the remote control, "MUTE" will
be shown on screen.
Pressing MUTE button again will clear the display,or adjust the
volume.
ＭＵＴＥ
5.SLEEP TIMER
When the SLEEP button is pressed, the setting on or off and the
remaining time of the sleep
timer function are displayed.
You can change the mode between on, off and the amount of time to
elapse before the unit
will shut itself off by cycling the sleep button.
ＳＬＥＥＰ ＴＩＭＥＲ
ＯＮ ９０ ｍｉｎ
6. OSD OFF
When OSD button is pressed, OSD system will be bypassed after 3
seconds.
Then there is no indication on the TV display.
Press the OSD button again.
ＯＮ ＳＣＲＥＥＮ ＤＩＳＰＬＡＹ
-
17
ＯＦＦ -