Playback Operation - Marantz SR7200 User Manual

STATION NAME PRESET (on PRESET display mode)
The station name preset function allows the name of each preset
channel to be entered using alphanumeric characters. The Station
Name button is valid only in the tuner mode. Before station name
preset operation, store stations with the preset memory operation.
Press the MEMORY button !4 on the front panel or MEMO button
1.
⁄6 on the remote for more than 3 seconds.
2. The left most column of the station name indicator flashes,
indicating the character entry ready status.
[Operation (Using the SR7200)]
3. When you press the TUNING/PRESET
turned, alphabetic and numeric characters will be displayed in the
following order:
A → B → C ...Z → 1 → 2 → 3..... 0 → – → + → / → (Blank) → A
UP →
← DOWN
4. After selecting the first character to be entered, press the
MEMORY button !4 . The entry in this column is fixed and the next
column starts to flash. Fill the next column and press the
MEMORY button !4 for more than 1 second to confirm the entry.
[Operation (Using the remote unit)]
First, press the TUNER button on the remote control unit.
(This operation is not necessary if the remote control unit has
already been operated in the TUNER mode.)
Enter the character using the ten keypad ⁄7 . For example, to
3.
enter "A":
1) Press the "1" button. "A" appears on the display column.
2) Every time the 1 button is pressed, the displayed character
changes in the order: A → B → C → 1 → A...
Pressing buttons other than the "1" button cause different
characters to be displayed in a similar way, so that other
alphanumeric characters can be entered. To enter a blank or
space, press the "9" button.
4. When the desired character is displayed, press the MEMO button
⁄6 to confirm the entry in this column and move to the next
column. After having filled all of the 8 columns, press the MEMO
button ⁄6 , for more than 1 second to confirm the entry.

PLAYBACK OPERATION

NORMAL PLAYBACK
1.
2.
3.
buttons !5 is
or
4.
Notes:
• In case of remote control operation, press one of the function
• Tone control is available for following surround modes.
LISTENING TO A DIFFERENT AUDIO SOURCE WHILE
WATCHING A VIDEO SOURCE (Using the remote control
unit)
1.
2.
13
Press the POWER ON button on the remote.
Press the FUNCTION SELECTOR button t on the front panel or
press the FUNCTION button , on the remote unit to select an
input source.
Turn the SURROUND MODE SELECTOR knob e on the front
panel or Surround mode buttons ⁄7 in the AMP MODE on the
remote unit to select the desired surround mode.
Adjust the volume level using the VOLUME knob r on the front
panel or press the VOL /
necessary, adjust the tone, select the TRB+, TRB– and BAS+,
BAS– by the Jog Dial n and press ENT button m in the AMP
MODE on the remote unit.
buttons twice within 2 seconds to select the function.
AUTO (except 96 kHz), STEREO, DOLBY PRO LOGIC and DTS.
Select one of the following video sources
TV, DVD, VCR1, DSS/VCR2 or AUX.
Next, select one of the following audio sources
FM, AM, CD, TAPE, or CD-R/MD.
button . on the remote. If