Marantz SR-18EX User Manual page 22

SYSTEM SETUP 1/2
S S Y T E M
V C R 1 O U T
T A P E O U T
D I G . O U T
_
T V A U T O
O S D I N F O
S . P . C .
6 C H I N P U T
R E T U N R N E X T
VCR1 OUT : Select the video source from the VCR1 output with
or button for video and audio dubbing to the
VCR1 deck.
The source is switched in the following sequence.
SOURCE TV
SOURCE
To determine each source, display the desired
source and press the
TAPE OUT : Select the audio source from the TAPE output with
or button for audio dubbing to the tape deck. The
source is switched in the following sequence.
SOURCE TUNER
....
To determine each source, display the desired
source and press the
DIG. OUT : Select the digital source from the DIGITAL output
with or button for digital dubbing to a CD-R
recorder or MD deck.
The source is switched in the following sequence.
SOURCE DIG.1
OFF SOURCE
To determine each source, display the desired
source and press the
TV AUTO: This product is equipped with a TV-auto ON/OFF
system, which automatically turns on or off the SR-
19EX power 1 second (for ON) and up to to 5
minutes (for OFF) after the TV video input signal is
present or absent.
Switch the TV AUTO ON/OFF function to enable or
disable with or button. To use this function, connect
the TV video input to TV tuner's video output.
OSD Info : If you select enable, SR-19EX will display the status
of the feature (Volume up/down, input select, etc..)
on the TV monitor.
But if you do not desire this information , select
"DISABLE ".
S.P.C. : System Power Control : If you select "ENABLE", the
SR-19EX will output a power On/Off command for a
CD player, MD player, or DVD player, from the
remote output terminal.
If you have corresponding marantz products , you
can turn them on/off simultaneously with SR-19EX.
6CH. INPUT: 6 channel direct inputs on the SR-19EX share the
front channel of the desired source.
Select the desired source with
S E T U P 1 / 2
: S O U R C E
: S O U R C E
: S O U R C E
: D I S A B L E
: E N A B L E
: D I S A B L E
:
O F F
E X I T
LD DVD DSS/VCR2
.....
or button.
CD CD-R/MD SOURCE
or button.
DIG.2 DIG.3 DIG.4
or button.
or button.
SYSTEM SETUP 2/2 (ASSIGNABLE DIGITAL INPUT)
Six digital inputs can be assigned as the desired source.
Use this menu to set the SR-19EX for connected equipment and type
of connection.
C D
T A P E
C D
T V
L D
D V D
V C R 1
D S S
R E T
Example:
When the digital output of a DVD player is connected to Digital 4
AUX
(input jack) of the SR-19EX and an optical digital output from a LD
player are connected to Dig.1.
1. Move the cursor on the DVD with
DIGITAL4 with ,
2. Move the cursor on the "LD" with
DIGITAL1 with ,
(Move the cursor with
Notes
• The TUNER and AUX are fixed to the analog input, and cannot
be selected for any digital input.
• When a DTS-LD or DTS-CD is playing, this setup is not available.
This is to avoid noise being generated from the analog input.
In this case, the DTS audio must be played through the player's
digital output to the digital input on the SR-19EX. This is because
the DTS soundtracks replace the standard PCM soundtracks on
DTS discs.
• The SR-19EX does not switch from digital input to analog input or
vice versa automatically.
In case both digital and analog inputs are connected to the SR-
19EX,if you desire to switch to analog input temporarily, you can
do so by pressing the A/D button.
17
S S Y T E M S E T U P 2 / 2
: A N A L OG
: A N A L OG
_
:
R A N A L OG
: A N A L OG
: D I G I T A L 1
:
D I G I T A L 4
:
A N A L OG
:
A N A L OG
U N R E X I T
or button, and select
button.
or button, and select
button.
or button, input is determine.)