Installation; Drawing Of Overall Dimension; Unit Base Diagram - Haier CA0035EAND Installation And Operation Manua

Installation

■

Drawing of Overall Dimension

■
Reference Position of Base
1. The bearing capacity of base is designed as per the weight of unit during operation.
2. The base may be of U-steel (designed by users as per overall dimensions of the unit) or
concrete structure and shall have flat surface.
3. A 10-20 mm rubber shock pad shall be placed between the unit and the base.
4. The unit and the base may be fastened with ø16 or ø18 anchor bolts.


Unit Base Diagram

CA0035EAND

Unit Base Diagram
6