Controls - RADLEY 1280-009 Owner's Manual

LOCATING A FELT WHEEL
1. Screw mandrel end to align with the
center of felt wheel.
2. Apply slight pressure and screw into
place in clockwise direction.

CONTROLS

TURN ON OR OFF ROTARY TOOL
1. To turn the tool "ON"
Press and release the on/off button. The tool will
start working at a speed of 5,000 rpm and the LED
worklight will turn on. If the on/off button is pressed
but not released the tool and LED worklight won't
turn on.
2. To turn the tool "OFF"
Press and release the on/off button. If for some reasons the on/off button doesn't work
there is always the option to alternatively turn off the tool by the following methods:
Press the minus (-) speed control button to bring the speed of the tool to the lowest
speed level (5,000 RPM). Hold the minus (-) speed control button for 5 seconds.
SPEED ADJUSTMENT
The speed of the tool can be regulated to suit a
variety of applications and materials. Press the
speed control button to select the desired speed.
Press plus (+) for increasing speed. Press minus (-)
for reducing speed.
Low speed use:
This speed would be used for fragile model parts.
It is recommended that the various shape grinding
stones be used at low speed to prevent them from
becoming too hot and deteriorating.
High speed use:
Glass projects require high speed drilling.
11