CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions — All the safety and operating in- structions should be read before the appliance is operated.
Page 4
EXAMPLE OF ANTENNA GROUNDING ACCORDING TO NATIONAL ELECTRICAL CODE INSTRUCYIONS CONTAINED IN ARTICLE 810 -"RADIO AND TELEVISION EQUIPMENT" ELECTRIC SERVICE EQUIPMENT NEC - NATIONAL ELECTRICAL CODE NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV (Cable-TV) system installer's attention to Article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
REMOTE CONTROLLER RC110CD MAIN UNIT (FRONT - CLOSED) STANDBY MAIN UNIT (FRONT - OPENED) STANDBY REPEAT DISPLAY MAIN UNIT (REAR) ANALOG OUT REMOTE CONTROL COAX.— DIGITAL OUT LEFT RIGHT OUT REMOTE EXT. INT. CONTROL SELECTOR OPEN CD110 OPEN — OPT.
Page 6
ABOUT THIS USER GUIDE Refer to the figures on page iv of this user guide. The numbers on the figures correspond to those in the text. All references to the connections and controls that are printed in BOLD type are as they appear on the unit.
Unlike conventional turntables for playing analog discs, the CD110 Compact Disc Player reads the information recorded on the disc from underneath without contacting it using a beam of laser light.
Press to turn the unit's power on or set it to the standby mode. (Operation is not possible if the unit is connected to the SR110, the SR110's rear switch is set to SYSTEM and the CD110's REMOTE CONTROL SELECTOR EXT/INT switch is at EXT.)
Page 9
1. REMOTE CONTROL The distance between the transmitter of the remote control unit and the IR SENSOR of the CD110 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possible.
* Never connect these jacks to the PHONO jacks of the amplifier. B REMOTE CONTROL IN/OUT jacks The remote control operations of a system can be performed by connecting the unit to a Marantz D-BUS compatible audio component using the supplied remote control cable. C REMOTE CONTROL SELECTOR EXT./INT.
Page 11
CONNECTIONS When this unit is to be used on its own, set the REMOTE CONTROL SELECTOR to INT, and when connecting the unit to Marantz audio components equipped with a D-BUS compatible remote sensor window using the remote control cable for use as part of a system, set the REMOTE CONTROL SELECTOR to EXT.
Page 12
CD by a regular CD player and will not be played. For further details, refer to the Instruction Manual of the CD recorder.
Page 13
CD PLAY button q/z to switch on the power. Press the * The CD110's power will also be switched on if the SR110 is connected to the REMOTE CONTROL jack and the SR110's power is on. Press the OPEN button b to open the panel.
SEARCHING/SKIPPING DIRECT SEARCH (SPECIFYING THE NUMBER OF A DESIRED TRACK AND PLAYING IT) Specify the track number using the numeric buttons (0 to Track 3 : Press numeric button "3." Track 12 : Press numeric button "1" and then numeric button "2"...
RANDOM PLAY When the RANDOM button u is pressed during play or stop, the unit automatically rearranges the sequence of the tracks and plays all the tracks in the resulting random order. This lights. TRACK TRACK * If the RANDOM button u is pressed with a disc placed on the disc tray while the tray is open, the disc tray will close and random play will begin.
PROGRAM PLAY LISTENING TO FAVORITE TRACKS IN A FAVORITE ORDER This function cannot be used with MP3 discs. – Random play cannot be used with program play. – AMS cannot be used with program play. When the PROG. button !5 is pressed in the stop mode, the "PROG"...
USING THE TIMER FUNCTIONS This unit enables a time to be set and for a disc to be played at this setting. The clock must always be set for the timer functions to be valid. * These functions work only when the unit is used on its own. The SR110's timer functions are used when the unit is operating as part of a system with the SR110.
TIMER PLAYBACK A CD can be played at a specific time by setting the playback time. The ON time and OFF time are set for timer playback. Press the TIMER button i on the remote control unit once. On the display, "On Time" appears first followed by the time, and the hour flashes.
MP3 PLAYBACK button q/z to switch on the power. Press the * The CD110's power will also be switched on if the SR110 is connected to the remote control jack and the SR110's power is on. Press the OPEN button b to open the panel.
Page 20
Only files with the ".mp3" extension are played: files with extensions such as ".wav," ".jpg" and ".doc" are skipped. With the CD110 compact disc player, the playback sequence may differ from the one displayed on the PC screen as shown above.
In the event of difficulty, consult your dealer or write directly to the nearest location to you that is listed on the Marantz Authorized Service Station list. Please quote the model and serial number of the equipment and give a full description of...
TECHNICAL SPECIFICATIONS AUDIO CHARACTERISTICS Channels ... 2 channels Frequency range ... 20Hz-20kHz Dynamic range ... > 90 dB S/N ratio (WTD) ... 87 dB Channel separation (1 kHz) ... 87 dB THD (1 kHz) ... 0.02 % Wow & flutter ... Precision of quartz Error correction ...
Page 23
P.O. Box 685, Bell Village, Port Louis, Mauritius PO BOX 1280, Sandhausen 69200, Germany A division of Marantz Europe B.V., Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands 14 Malvern Road, Mt. Albert, Auckland, New Zealand Sandkerveien 64, Oslo 0483, Norway P.O.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
IMPORTANT SAFETY This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installa- tion and operation precautions which you should be particularly aware of. Read Instructions - All the safety and operating instructions should be read before the appliance is operated.
Page 27
Object and Liquid Entry-Never push objects of any kind into this video product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product.
Page 28
FM/AM NEWS/TA RANDOM REPEAT VOLUME MUTE DISPLAY ENTER TIMER SLEEP SYSTEM REMOTE CONTROLLER RC110SR STANDBY DISPLAY STANDBY DISPLAY PHONES ANTENNA FM 75Ω LEFT RIGHT MUTE 12 13 MUTE BAND TUNER MEMO TIMER MODEL NO. SR110 REMOTE CONTROL SELECTOR SYSTEM INT. RIGHT LEFT OPEN...
Do not handle the mains lead with wet hands. EQUIPMENT MAINS WORKING SETTING Your Marantz product has been prepared to comply with the household power and safety requirements that exist in your area. SR110 can be powered by 120 V AC only.
Power switch Press this switch to turn the power of the unit ON. If components of Marantz AV system are connected through the REMOTE CONTROL bus, this will turn these components ON. Press this switch again to turn the unit OFF, and the unit enters standby mode.
OPERATION OF REMOTE CONTROL UNIT 1. REMOTE CONTROL The distance between the transmitter of the remote control unit and the IR SENSOR of the SR110 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possible.
This switch selects the system operation mode. Set to SYSTEM position when the unit is being used in combination with a CD (CD110). If your component is not capable of system connection, set this switch to INT position. H AC power cord Plug into an AC 120V household outlet.
, AMP button The JOG control can be used in the TUNER, AMP or TIMER modes. Press to change the mode of JOG control to AMP mode. 5 seconds after the previous JOG operation is finished, the mode of JOG control will return to AMP mode automatically. You can also use this button to return to AMP mode immediately.
SYSTEM (Bus) jacks, such as CD110. An example procedure for system operation is described below. Here, we take as an example the connection of a CD player (CD110) to this receiver (SR110) through the REMOTE CONTROL jacks. (The numbers of controls and buttons on the main unit are...
ANTENNA FM 75Ω LEFT RIGHT ANALOG OUT REMOTE CONTROL LEFT RIGHT OUT AM LOOP ANTENNA MODEL NO. SR110 REMOTE CONTROL SELECTOR SYSTEM INT. RIGHT COAX.– DIGITAL OUT –OPT. MODEL NO. CD110 REMOTE EXT. INT. CONTROL SELECTOR SPEAKER SYSTEM SPEAKER SYSTEM LEFT...
Function button control Source to be played on the remote FM/AM FM or AM CD player (CD110) CD recorder MD deck AUX (TV game, etc.) Start playing the source component. Adjust the listening volume with the VOLUME control ⁄4 or VOLUME buttons The source selector will change players automatically in SYSTEM mode.
TUNER OPERATION TO LISTEN TO THE TUNER 5 2, 4 STANDBY DISPLAY TUNER TIMER PHONES Press the power switch q/z to turn the power ON. Press the TUNER button . or FM/AM button w. “TUNER” is displayed. TUNER BAND To select the band of reception, press the BAND button ⁄1 or the FM/AM w button on the remote control.
When up to 30 stations have been preset, the auto preset memory function automatically stops. To stop in mid-operation, press the MEMO button ⁄2 or the “0” button e on the remote control. Note: If you operate the auto preset memory again, new received frequency is stored into the preset memory 01 to 30.
Page 39
Press the TIMER button !8 to confirm the actual time. The clock now starts. PROGRAMME TIMER SETTING You can play marantz CD player CD110, when it is connected with remote control bus correctly. The timer function is built into this receiver allows you to perform the following operations: •...
Page 40
Select a function (Play mode) TIMER 1 Turn the JOG control m to select the source (TUNER or CD) to be played. 2 Press the TIMER button ⁄0 . 3 When you select “TUNER”, turn the JOG control m to select a preset number to be received.
Page 41
CANCEL TIMER SETTING Press the power switch q/z to turn the power of the unit TIMER Press the TIMER button ⁄0 on the front panel until “Timer ON/OFF” is displayed. Turn the JOG control m to select “OFF”. Press the JOG button m. Important “TIMER”...
If the fault cannot be remedied after the following checks, please consult your dealer or nearest Marantz service agent. Sound comes from only one side. Check the connections of the loudspeaker which is not working.
Page 43
TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range ... 87.5 - 108.0 MHz Usable Sensitivity ... 0 dBµ Signal to Noise Ratio ... Mono/Stereo 70/65 dB Distortion ... Mono/Stereo 0.2/0.3 % Stereo Separation ... 1 kHz 40 dB Image Rejection ... 98 MHz 80 dB Tuner Output Level ...
Page 44
P.O. Box 685, Bell Village, Port Louis, Mauritius PO BOX 1280, Sandhausen 69200, Germany A division of Marantz Europe B.V., Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands 14 Malvern Road, Mt. Albert, Auckland, New Zealand Sandkerveien 64, Oslo 0483, Norway P.O.