Advertisement

Quick Links

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Tools Needed

Helpline
If you have any problems with this product or require any replacement
Fittings please contact Customer Services Tel:0333 777 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be faulty. Should you need to return
the unassembled product, please repack in the original packaging.

IMPORTANT

• We suggest you spend a short time reading through this leaflet and then follow the simple step-
by-step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of two persons is required to assemble this product.

PRODUCT INFORMATION

• Made from hollow board, honeycomb board ,partical board & MDF with PVC foil finish
• Made in China

CARE INSTRUCTIONS

•Gloss finishes are prone to light surface scratch and it is therefore very imporant that you care for this item correctly.
•For general cleaning, periodically dust with a soft clean lint-free cloth or a soft micro fibre cloth Please note soft cloths (including yellow dusters) contain
abrasive fibres which can lightly scratch the surface, if in doubt please try your cloth in an inconspicuous area of the furniture first to assess its suitability.
• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Do not use furniture polish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching or damage.
• Do not put hot dishes directly on the surfaces of the item.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
OPUS GLOSS STORAGE COFFEE TABLE
ASSEMBLY INSTRUCTIONS.
Page 1 of 3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OPUS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Next OPUS

  • Page 1 OPUS GLOSS STORAGE COFFEE TABLE ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. Tools Needed Helpline If you have any problems with this product or require any replacement fittings please contact Customer Services Tel:0333 777 8999 Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
  • Page 2 FITTINGS PARTS STEP ONE Please remove the protective clear film on the gloss panels when required in the steps (5) & (6) as this will prevent any accidental scratches which may occur during assembly. 1. Insert 10× cambolts (D) into panels (1) & (3) by a screwdriver until tight.
  • Page 3 .Please note two people are required to remove the panels one at a time 3, Remove the protective film from panels (4) & (5). Next Retail Ltd, Desford Road, Enderby, Leicester, LE19 4AT Page 3 of 3...

Table of Contents