Next OPUS Assembly Instructions Manual

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ

Tools Needed

Helpline

If you have any problems with this product or require any
replacement fittings please contact Customer Services
Tel: 0844 844 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed
faulty. Should you need to return the unassembled product, please repack in the original pac

IMPORTANT

• We suggest you spend a short time reading through this leaflet and then follow the simple s
by-step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of two persons is required to assemble this product.

PRODUCT INFORMATION

• Made from MDF & partical board with a wood effect finish.
• Made in China

CARE INSTRUCTIONS

• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Do not use furniture polish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediat
• Ensure the product is protected with mats and coasters when items are placed on the surfa
damage.
• Do not put hot dishes directly on the surfaces of the item.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cra
warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings
ASSEMBLY INSTRUCTIONS.
Page 1 of 6
OPUS TALL CORNER SH