1. Manuals
  2. Brands
  3. Blu Manuals
  4. Indoor Furnishing
  5. Contempo Series
  6. Assembly instructions manual

Blu Contempo Series Assembly Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IMPORTANT – RETAIN FOR FUTURE REFERENCE – READ CAREFULLY 
1.
Please check the contents of the boxes before attempting to assemble this product. A full checklist of parts is in this 
instruction booklet. Check it very carefully. In the unlikely event that any components are damaged or missing, please contact 
our customer service hotline at 407‐426‐7674. 
2.
Assemble as near as possible to the point of use. Take extreme care when lifting to avoid personal injury or damage to the 
product.  
3.
This product contains small items and plastic bags. Please be aware of the danger to young children.  
4.
A Pencil, Phillips Screwdriver, Level, and a Measuring Tape will be required for installation.  
ASSEMBLY INSTRUCTIONS 
635 W. Michigan Street Orlando, FL 32805 · PH 407-426-7674 · Fax 407-426-7721
The Contempo™ Series 
www.bluworldusa.com ·
http://shop.bluworldusa.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Contempo Series and is the answer not in the manual?

Questions and answers

Related Manuals for Blu Contempo Series

Summary of Contents for Blu Contempo Series

  • Page 1 The Contempo™ Series  IMPORTANT – RETAIN FOR FUTURE REFERENCE – READ CAREFULLY  Please check the contents of the boxes before attempting to assemble this product. A full checklist of parts is in this  instruction booklet. Check it very carefully. In the unlikely event that any components are damaged or missing, please contact  our customer service hotline at 407‐426‐7674.  Assemble as near as possible to the point of use. Take extreme care when lifting to avoid personal injury or damage to the  product.   This product contains small items and plastic bags. Please be aware of the danger to young children.   A Pencil, Phillips Screwdriver, Level, and a Measuring Tape will be required for installation.   ASSEMBLY INSTRUCTIONS  635 W. Michigan Street Orlando, FL 32805 · PH 407-426-7674 · Fax 407-426-7721 www.bluworldusa.com · http://shop.bluworldusa.com...

  • Page 2: Identification Of Components

    Identification of Components  A. Water Pump B. Flow Control Valve C. LED Light Vary (Model May (Inside Reservoir) F. Reservoir Tray E. EZ Anchor ™ D. Wire Clips G. Wall Spacer Pad H. Wall Bracket I. Water Guiding Pad J. Light Tray K.

  • Page 3: Section 1 - Initial Prepping

    NOTES ON POSITIONING YOUR FOUNTAIN a. Try to position your fountain near an electrical outlet. The fountain should not be used outdoors with the transformer provided. Should you wish to use outdoors a pump with an outdoor rated transformer or A/C pump rated for outdoor use will be needed.

  • Page 4: Section 3 - Water Diffuser Installation

    Push the Flow Control Valve (B) into the Water Pump (A) output port as shown in Fig 2.2 A & 2.2 B. Step 2.2 Fig 2.2 A- 2.2 B Section 3 – Water Diffuser Installation  Locate the Water Diffuser (K) and place into the water collection channel as shown in Fig 3.1 A & Step 3.1 3.1 B.

  • Page 5: Section 5 - Mounting The Water Feature

    Connect the power cord to the Step 4.3 LED Light (C) as shown, and make sure it is behind the panel bracket, as shown in the pictures to the right. Fig 4.3 A & B Step 4.4 You are provided with Wire Clips (D) to neatly run the LED Light (C) power cord down and behind the water feature as shown in Fig 4.4A and Fig 4.4B.

  • Page 6: Section 6 - Operating Your Fountain

    Step 5.2 To install the EZ Anchors™ (E), gently tap or press the tip into the drywall and slowly screw the anchors into the wall, as shown in Fig 5.1 A. Make sure the flat side of the anchor is flush with the wall.
  • Page 7 Step 6.3 After mounting your fountain to the wall, fill the reservoir with water. The water level must be maintained at least ¼” above the Water Pump (A). If the water level drops below the Water Pump (A), damage may occur. Step 6.4 You can now plug in your Water Pump (A) and LED Light (C) into your designated GFCI electrical outlet.

  • Page 8: Warranty

    Warranty Bluworld product is warranted against defects that render it unfit for its reasonably intended use. This Warranty is not extended to cover use of the product for a purpose other than as intended, and if the product is used unreasonably, or for purposes other than as intended, or if it is altered, modified or repaired by a party other than Bluworld, then the Warranty shall be null and void.

Table of Contents