Table of Contents
Advertisement
Maintenance
If any worn or broken components are found, take the unit out of service and arrange for repair. Do not
use this unit until it is safe
⚠
WARNING:
To maintain your Rolling Air Evacuation Oil Drain:
•
Keep the Rolling Oil Drain clean and free of debris and dirt.
•
All exposed surfaces of the Oil Drain may be brushed clean and wiped with a weak solution of
soap and water to remove grease and oil.
•
Regularly wipe clean the Pressure Relief Valve, Pressure Gauge and Quick Connectors.
•
Verify the 2" Oil Transfer Ball Valve is opening and closing completely. If the valve sticks or will not
completely open/close then disassemble and clean debris from the valve.
•
Inspect for leaks and dispose of waste oil in accordance with all local, state, and federal
regulations.
•
Check Casters and Brackets for damage and wear. Replace as required.
⚠
WARNING
out of service, then contact your dealer, visit rangerproducts.com/support/, or call (805) 933-
9970.
RD-20SE Rolling Air Evacuated Oil Drain
Always wear appropriate personal protective equipment
maintenance!
Do not operate your Air Evacuation Oil Drain if you find issues; instead, take the unit
10
P/N 5900327 — Rev. A — February 2022
while performing any
Advertisement
Table of Contents
