Viewing / Deleting Saved Data; Viewing A Data List - T&D RTR-57U User Manual

Wireless thermo recorder data collector
Hide thumbs Also See for RTR-57U:
Table of Contents

Advertisement

◆ About Monitoring Communication Time
Please note that if the monitoring interval is set for less time than
communication takes to complete a round of monitoring, the system will
automatically extend the interval to allow for the necessary amount of
communication time. A short interval between monitoring sessions will result in
a shortened battery life.
The following is a rough estimate of communication time; this will, of course,
depend on the number of groups and remote units registered to the collector.
Note
・After communication has completed, display time will take about 2 seconds per unit
<Communication Time for [All Groups] >
・If there are 64 Remote Units registered to the group
  (24 seconds per group x Number of groups)
・If there are 120 Remote Units registered to the group
  (54 seconds per group x Number of groups)
 Moreover, the display time for each unit is about 2 seconds.
<Communication Time for [Specify Groups]>
The communication time will depend on the number of registered remote
units. For 250 units registered to 1 group the time will be 54 seconds plus a
display time for each unit of 2 seconds.
51
51

Viewing / Deleting Saved Data

All downloaded data is temporarily saved in the RTR-57U Collector. It
is possible to select saved data and view it in graph form or select it
for deletion.

◆ Viewing a Data List

In the Main Menu, open [DATA LIST] or press the [List] button on the main
unit to view the data list.
Data Number (No. 7 of 7)
The most recently downloaded data will be on top.
(If the data logger has been registered)
 ①
・Unregistered data loggers will appear by channel name.
・If a channel name shows [......].
This means that when the recording conditions were set via direct
cable connection between the data logger and the computer the
channel name was entered using two byte code.
・Only the first 6 letters of Group and Remote Names will be
displayed.
 ②
・The downloaded data for TR-71U / TR-72U will be displayed in the
data list under TR-71S / TR-72S.
�� ��
��
Device Name
Downloaded date
・RTR51    08 / 10
 G R O U P 2 S a m p l e
Group Name / Remote Unit Name
52

Advertisement

Table of Contents
loading

Table of Contents