Nokia N93 Manual page 240

To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data
Follow the instructions from your service provider.
Access point name—You obtain the access point name
from your service provider.
User name—The user name may be needed to make a data
connection, and is usually provided by the service provider.
Prompt password—If you must enter the password every
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
Authentication—Select Normal
Homepage—Depending on the access point you are setting
up, enter the web address or the address of the multimedia
messaging center.
Select Options > Advanced settings
following settings:
Network type—Select IPv4 settings
other settings depend on the selected network type.
Phone IP address (for IPv4 only)—Enter the IP address of
your device.
or Secure.
to change the
or IPv6 settings. The
DNS address—In Primary name
address of the primary DNS server. In
server:, enter the IP address of the secondary DNS server.
Contact your internet service provider to obtain these
addresses.
Proxy serv. address—Define the address for the proxy
server.
Proxy port number—Enter the proxy port number.
Wireless LAN
Follow the instructions from your service provider.
WLAN netw. name—Select
netw.. If you select an existing network,
mode and WLAN security mode
settings of its access point device.
WLAN netw. mode—Select
network and to allow devices to send and receive data
directly; a wireless LAN access point device is not needed.
WLAN security mode—Select the encryption used: WEP,
802.1x (not for ad hoc networks), or WPA/WPA2. If you
select Open network, no encryption is used. The WEP,
802.1x, and WPA functions can be used only if the
network supports them.
WLAN security sett.—Enter the settings for the selected
security mode:
serv.:, enter the IP
Second. name
Enter manually or Search for
WLAN netw.
are determined by the
Ad-hoc to create an ad hoc
107