Advertisement
Figure 3
B. Remove the battery cover from the battery base
(Figure
3).
C. Remove the terminal of the positive battery cable
from the battery post
Note: Ensure that the terminal positive battery
cable does not touch the battery post.
1
2
Figure 4
1. Terminal cover
2. Positive terminal
5. Bleed the hydraulic pressure from the machine by fully
moving the lift control for the cargo box forward and
backward several times.
Note: The engine is shut off when bleeding the
hydraulic pressure from the machine.
(Figure
4).
3
4
G022071
3. Battery post
4. Battery
1. Forward
2. Backward
Installing the Relay-Controller
and Adapter Harness
Installing the Relay Controller and
Adapter Harness to the Machine
1. Disconnect the 2-pin connector of the wiring harness
for the machine from the 2 socket harness connector
for the solenoid of the differential
1. 2 pin connector (machine
wiring harness)
2. 2 socket
connector (solenoid
harness—differential)
3. Solenoid
2
Figure 5
3. Lift control (cargo box)
(Figure
6).
Figure 6
4. Differential
5. Front of the machine
Advertisement
