The Database/Barcode Option; System Contents; Compact Flash (Cf) Files - Logicube Omniclone Xi User Manual

Introduction
Logicube Omniclone Xi ™ User's Manual

6. The Database/Barcode Option

The Logicube Database/Barcode Option gives your
Omniclone Xi™ the ability to record vital cloning
information and store it on the Compact Flash (CF)
drive. This information is stored in a format that is
easily read by most database programs (i.e.
Microsoft Excel, Microsoft Access, dBase, etc.).
The information is gathered from the cloning
session, drive firmware and the optional Barcode
Scanner.
NOTE: The Database/Barcode option can be
purchased for your Omniclone Xi™ unit. Please
contact Logicube if you wish to purchase any of the
option packages.

System Contents

When the Logicube Database/Barcode option is
purchased, it comes with the following items:
A Barcode Scanning Wand, (this plugs into the
PS/2 connector in front of the Omniclone-Xi™).
A User's Manual for the Barcode Scanner.
A User's Manual for the DataBase™ option.
A sheet that contains the code to unlock the
Logicube DataBase™ option.
NOTE: Step-by-step instructions for unlocking
the option are discussed under "Set Option" on
page 25.

Compact Flash (CF) Files

The Logicube Database/Barcode option adds two
files to the Compact Flash (CF) drive. The two files
are Config.txt and Database.csv.
32