Scan Target Mode Step-By-Step; Repair Target Mode - Logicube Omniclone Xi User Manual

OMNIDIAGNOSTICS™
28
Fast (Default) – This is the fastest.
Thorough – This is the most thorough.
The Thorough operation writes patterns to some
sectors, which can cause data corruption. Use this
setting only when data loss is not an issue.

Scan Target Mode Step-by-Step

1. From anywhere in the menu system, press the
Set button to enter the Settings menu.
2. Press the Cloning Mode icon that appears in the
upper left-hand corner. A list of the available
cloning modes appears.
3. Press the "Scan" icon, the Scan Target™
settings screen will appear.
4. Adjust the "SPEED" setting as needed.
5. You may now double-click the "Start/Stop"
button to start cloning. You will be warned that
continuing will modify your Destination drive. If
you are ready to do this, choose "Yes" to
continue.
6. When finished, the Logicube Omniclone Xi™ will
notify you and display a list of the scanned
drives along with bad or weak sectors found on
each drive.
7. After reviewing the summary, touch the Back
icon to return to the main menu.

Repair Target Mode

Repair Target mode scans Target drives using a
Logicube exclusive algorithm in an attempt to repair
all weak and bad sectors encountered. Please note
that this process can take a long time.
The Repair Target operation directly manipulates
the contents of the Target drive with no effort being
made to retain the original data. It does not prompt
the user when a bad sector is reallocated so any
data on a repaired sector is lost.
Logicube Omniclone Xi ™ User's Manual