Table of Contents
Advertisement
Customizing Your C 306
To change the mute level:
* press SETUP to enter the setup menu
* turn the SELECT knob (or use the up or down NAVIGATE buttons on the
remote) to move to "MUTE LEVEL" mode
* turn the VOLUME knob (or use the left or right NAVIGATE buttons on the
remote) to choose the mute mode you want
* press ENTER to save change the menu items
* press SETUP to exit the setup menu
3.6 SETTING A VOLUME LEVEL MODE:
You may also set a volume level for the C 306, a particularly useful feature if
the system had different input gain for the input source. The C 306 has two
volume level modes for select:
* COMMON (factory default)
all inputs use same volume level
* INDIVIDUAL
each input has an individual volume level
To change the volume level mode:
* press SETUP to enter the setup menu
* turn the SELECT knob (or use the up or down NAVIGATE buttons on the
remote ) to move to "VOLUME MODE"
* turn the VOLUME knob (or use the left or right NAVIGATE buttons on the
remote ) to select the "COMMON" or " INDIVIDUAL
* press ENTER to save change to menu items
* press SETUP to exit the setup menu
3.7
RESET DEFAULTS:
If necessary, it is possible to reset all of the factory default settings for the C 306
Reference Preamplifier so as to start again.
IMPORTANT NOTE:
Resetting factory default settings caused any customization of the preamplifier to
be lost, including custom names, volume level mode, mute mode. etc.
To reset all setting of the C 306 to the original factory setting:
* press SETUP to enter the setup menu
* turn the SELECT knob (or use the up or down NAVIGATE buttons on the
remote) to move to "LOAD DEFAULT"
* press ENTER to save change to menu items
* press SETUP to exit the setup menu
Advertisement
Table of Contents
