Table of Contents
Advertisement
Quick Links
CAD-308 SA
Hybrid Stereo Power Amplifier
Operation and Installation Manual
NOTE: Please read this manual carefully before installing your new amplifier into your stereo system. It
contains important set up and installation information as well as safety warnings regarding high AC voltage
inside the chassis.
Advertisement
Table of Contents
Related Manuals for Cary Audio Design CAD-308 SA
Summary of Contents for Cary Audio Design CAD-308 SA
- Page 1 CAD-308 SA Hybrid Stereo Power Amplifier Operation and Installation Manual NOTE: Please read this manual carefully before installing your new amplifier into your stereo system. It contains important set up and installation information as well as safety warnings regarding high AC voltage inside the chassis.
- Page 2 Please read the instruction manual so that you are familiar with the operation of your new CAD-308 SA hybrid power amplifier. Thank you again for your interest in and continued support of Cary Audio Design. Dennis J. Had...
- Page 3 Specifications: CAD 308 SA Hybrid Power Amplifier Dimensions: 17 _” W x 4 _” H x 14 _” D (~ 44.4 cm x 11.4 cm x 36.8 cm) Weight: 18.75 lb. (8.52 kg) Circuit: Class A Triode vacuum tube driver stage, Class AB solid state output stage Frequency Response: 8 Hz - 150 kHz + 0, - 3 dB...
-
Page 4: Front Panel Features
Front Panel Features Power Switch: 2 position rocker switch off/on controls the AC line voltage On LED: Indicates internal power supply is power up Operate LED: Each channel, Indication of time delay release (approximately 1 minute) Dual Output Level Meters: These high quality meters are designed to show power output levels from the power amplifier. -
Page 5: Warranty Card
United States, you should fill out the enclosed warranty registration card and return it to Cary Audio Design, within 15 days of your purchase or register online at www.caryaudio.com. Warranty restrictions and applications may apply. Consult the warranty section of this manual. -
Page 6: Operation
OPERATING VOLTAGES PRESENT INSIDE CAN BE FATAL! Factory Service If it becomes necessary to replace any parts, the same brand and part number and style should be used. New parts are available from Cary Audio Design, Inc. 1020 Goodworth Drive, Apex, North Carolina, 27539. -
Page 7: Technical Support
Do not return the CAD-308 SA to the factory without a Return Authorization Number (RMA number) from the Customer Service Department. As the packing and shipping is being done by others, Cary Audio Design will assume no responsibility if the transportation company refuses to pay a damage claim due to your improperly packing or for lack of insurance should the unit be lost or damaged in shipment from you to us.
Need help?
Do you have a question about the CAD-308 SA and is the answer not in the manual?
Questions and answers