Operating Instructions; Remote Control; Activation Button - NewAir NOH17GBK00 Owner's Manual

OPERATING INSTRUCTIONS

POWER BUTTON
The ON/OFF power switch is used to control the power of the heater.
• Plug the ceiling heater into a grounded 110-120v 50-60Hz power outlet.
• Only operate the heater when it is in the upright position.
HEATER BUTTON
The ON/OFF button is used to activate the heating function of the heater.
• Our ceiling heater is equipped with three heating settings, but if you use the button
to activate the heating it will only have two, 800w and 1500w, please use the remote
to use the three heat settings.
• Press the heater button once to operate the heater on low (800W) power.
• Press the heater button twice to operate the heater on high (1500W) power.
• Press the heater button three times to activate the LED ambient lighting without
heat.
• Press the heater button four times to activate the LED ambient lighting and to
operate the heater on high (1500W) power.
• Press the heater button five times to shut the light and heat off.

REMOTE CONTROL

• Press on the ON/OFF power switch to activate the heater.
• To operate the heater on high power (800W), press on the left side button of the
remote control.
• To operate the heater on low power (700W), press on the right side button of the
remote control.
• Press on both the left and right side buttons of the remote control for maximum
power (1500W).
• To operate the LED light, press the top button of the remote control.
The main power switch must be turned on to use the remote control
www.newair.com
EN
11