Advertisement
5
3.12 HOW TO REMOVE THE SW ARM
1. According to "3.8 HOW TO REMOVE THE ROLLER ASSY", remove the Roller Arm ASSY.
2. Remove the Return Spring of SW Arm (Fig.1).
3. Expand the Right SW Arm until the end contacts the Chassis (Fig.2).
4. Hold the SW Arm up while expanding it and remove it.
Fig.1
Fig.2
3.13 HOW TO REMOVE THE DAMPER
1. According to "3.9 HOW TO REMOVE THE CRG MECHANISM ASSY", remove the CRG Mechanism ASSY.
2. Insert the flathead screwdriver under A-part of plate which is joined with the Damper, raise the plate and release the
clinch.
3. Similarly, insert the flathead screwdriver under C-part, raise the plate, release the clinch and remove the Damper.
C
Caution: Make sure to reinstall the clinch after repair.
5
6
Return Spring of SW Arm
Expand the Right SW Arm
CX-3311
6
7
Expand the Right SW Arm
until it contacts this point.
A
7
8
A
B
C
D
E
F
31
8
Advertisement
