Advertisement
5
3.5 HOW TO TREAT LEAD WIRES
1. Solder the lead wires so that the green and white wires pass above the red and black wires (Fig. 1).
2. Wrap the red and black wires around the green and white wires one time (Fig. 2).
3. Twist the red and black wires two and half turns (Fig. 3).
4. Make sure that the wound red and black wires are located in the positions shown in Fig. 4 and Fig. 5.
Fig.1
Fig.3
Fig.4
Tips of the red and black wires should be
below the CORE UNIT surface.
5
6
Fig.2
Fig.6
Upper limit
Tips of the wires should be above the top surface
of Chassis. (They must not touch it.)
CX-3311
6
7
Lower limit
7
8
A
B
C
D
E
F
25
8
Advertisement
