3onedata IMC100-2T1F-1D Quick Installation Manual

IMC100-2T1F-1D(3IN1)
Industrial Media Converter
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili,
Shenzhen
Website: www.3onedata.com
Tel: +86 0755-26702688
Fax: +86 0755-26703485
【Package Checklist】
Please check whether the package and accessories are intact
while using the media converter for the first time
1. Media converter (equipped
with terminal blocks)
3. DIN-Rail mounting
attachment
5. Certification
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【Product Overview】
The product is industrial media converter. Its model is:
IMC100-2T1F-1D(3IN1) (1 100M fiber port+2 100M copper
ports+1 3IN1 serial port)
【Panel Design】
Rear view, top view and bottom view

Front view and side view

Nanshan District,
1.
2.
2. Quick installation
3.
guide
4.
4. CD
5.
6.
6. Warranty card
7.
8.
9.
10.
【Mounting Dimension】
Unit: mm
DIN-Rail mounting kit
Power supply terminal
Grounding screw
Power supply indicator
Running indicator
Port indicator
100M fiber port
100M copper port
3IN1 serial port
Serial port indicator
【DIN-Rail Mounting】
For convenient usage in industrial environments, the product
adopts 35mm DIN-Rail mounting, mounting steps as below:
Step 1 Check if the DIN-Rail mounting kit is installed firmly.
Step 2 Insert the bottom of DIN-Rail mounting kit (one side
with spring support) into DIN-Rail, and then insert
the top into DIN-Rail.
Tips:
Insert a little to the bottom, lift upward and then insert
to the top.
Step 3 Check and confirm the product is firmly installed on
DIN-Rail, then mounting ends.
【Disassembling DIN-Rail】
Step 1 Device power off.
Step 2 After lift the device upward slightly, first shift out the
top of DIN-Rail mounting kit, then shift out the
bottom of DIN-Rail, disassembling ends.