Screen Menu Options
Screen Menu Options
Auto
Auto
Adjustment
Adjustment
- RGB (PC) mode only; This function doesn't work for RGB-DTV mode.
- Automatically adjusts picture position and minimizes image shaking.
- After adjustment, if the image is still not correct, your Monitor is functioning properly but needs further adjustment.
- The
and
1. Press the MENU button and then use
G
2. Press the
button and then use
3. Press the
G
button to run Auto configure.
• When
has finished,
• If the position of the image is still not correct, try Auto adjustment again.
4. In RGB (PC) mode, if the image needs to be adjusted more after using
, you can make further adjustments with the
Setting Picture Format
Setting Picture Format
- Caution: If a 4:3 fixed image is on the screen for a long time, it may remain visible.
- Set every aspect ratio for Monitor, Video, Component 480i sources.
- Use 4:3, or 16:9 for other RGB-PC and DVI-PC sources.
- Horizon is not available for Component (480p,720p,1080i), DTV (480p,720p,1080i) sources.
1. Press the ARC button repeatedly to select the desired picture format. You can also adjust
•
Choose
when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the
left and right sides.
•
Choose
when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
•
Choose
when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides,
to create a spectacular view.
•
- Choose
when you want to view the picture without any alteration. However, the top and bottom portions of the
picture will be cropped.
Screen Position
Screen Position
- This function works in the following modes:
RGB-PC, RGB-DTV (480p,720p,1080i), DVI-DTV (480p,720p,1080i), COM-
PONENT (480p,720p,1080i).
1. Press the MENU button and then use
2. Press the
G
button and then use
G
3. Press the
button and then use
4. Press the OK button to save.
are not active in DVI mode.
D / E
button to select the
D / E
button to select
will be shown on screen.
D / E
button to select the
button to select
D / E
D / E / F / G
button to adjust the position.
menu.
.
option.
menu.
.
Operation
SCREEN
SCREEN
Auto config.
G
To set
ARC
Position
Manual config
Reset
Menu
Prev.
in the
menu.
SCREEN
SCREEN
Auto config.
ARC
G
D
Position
F
G
E
Manual config
Reset
Menu
Prev.
Owner's Manual 25