Pip (Picture-In-Picture)/Double Window Feature; Watching Pip/Double Window; Swapping The Pip/Double Window; Selecting An Input Signal Source For Pip/Double Window - LG MU-42PM11, MU-42PM12X, MU-42PM20, MU-50PM10, MU-50PM11, MU-50PM20 Owner's Manual

Operation
PIP (Picture-In-Picture)/Double W
PIP (Picture-In-Picture)/Double W
- PIP lets you view 2 different inputs pictures (sources) on your Monitor screen at the same time. One source will be large, and
the other source will show a smaller inset image.
- Double Window mode splits the screen into 2, allowing 2 picture sources to be shown on the Monitor screen at the same time.
Each source is given half the screen.
W W atching PIP/Double W atching PIP/Double W
Press the PIP/DW button to access the sub picture. Each
press of PIP changes the PIP options as shown below.
PIP
Off
Swapping the PIP / Double W
Swapping the PIP / Double W
Use the SWAP button to switch the main and sub pictures.
Main Picture Sub Picture
Main Picture Sub Picture
Selecting an Input Signal Source for PIP
Selecting an Input Signal Source for PIP
Use the SUB INPUT button to select the input source for the
sub picture. Each press of SUB INPUT button changes the
PIP source.
Main Picture Source
RGB or DVI
Component 480p/720p/1080i
Component 480i
Video or S-Video
28 Plasma Monitor
indow indow
DW 1
DW 2
indow
indow
/Double W indow
/Double W indow
Available Sub Picture Sources
Component 480i, Video, or S-Video
Video or S-Video
Component 480p/720p/1080i, RGB, or DVI
RGB, or DVI, Component 480p/720p/1080i
indow Feature
indow Feature
Moving the PIP (PIP Mode only)
Moving the PIP (PIP Mode only)
Press the WIN.POSITION button.
Press the D / E / F / G button repeatedly until desired posi-
tion is achieved. The sub picture moves up/down/left/right.
• You can also move the PIP position with
the menu.
PIP Size
PIP Size
Press the WIN.SIZE button and then use
change the sub picture size.
• Using the Win.size function in Double Window mode, main
and sub picture sizes are changed simultaneously.
Using the Win.size function in PIP mode, sub picture size
is changed.
• You can also change the sub picture size with
the menu.
PIP T ransparency (PIP
PIP T ransparency (PIP
- To make the PIP clear or opaque
1. Press the MENU button and then use
select the menu.
2. Press the G button and then use
.
G
3. Press the button and then use
PIP transparency.
4. Use the F / G button to make appropriate adjustments.
• The adjustment range of
5. Press the OK button to save.
in
Win.position
▲
◀ ▶
▼
F / G
button to
in
Win.size
F G
Mode only)
Mode only)
button to
D / E
button to select
D / E
F / G
button to adjust
is 0 ~ 10.