Philips DVP520 Service Manual page 6

Step3: Dismantling Loader, First, disconnect the 3 connectors
aiming in the figure, and then remove the 4 screws at both
sides of the loader,(Figure 4)
All manuals and user guides at all-guides.com
CON 4
CON 5
Figure 5
2-2
Mechanical and Dismantling Instructions
Step4: Dismantling Front Panel: disconnect the 2 connectors
aiming in the figure then Release the snaps on the both sides
of Front Panel and gently pull the Panel out from the set.
(Figure5& 6)
Figure4
CON 1
CON 2
CON 3
Snap1 Snap2
Figure 6