Flex FX5441 Operator's Manual page 10

ATTACHING THE INFLATOR/DEFLATOR
ACCESSORY FOR USE AS AN INFLATOR
a. Remove the extension tube.
b. Align the raised posts in the inflator/deflator
accessory with the grooves on the blower
housing. Push the inflator/deflator accessory
onto the blower housing as far as it can go.
c. Rotate the inflator/deflator accessory
clockwise according to the rotation direction
marked on the blower housing to lock it into
place. Pull on the accessory to ensure it is
securely locked in place.
d. To remove the accessory, rotate the inflator/
deflator accessory counterclockwise, then pull
it straight out from the blower to remove it.
ATTACHING THE INFLATOR/DEFLATOR
ACCESSORY FOR USE AS A DEFLATOR
a. Align the grooves on the inflator/deflator
accessory with the ribs on the blower air inlet,
then insert the accessory onto the air inlet of
the blower as shown.
b. To remove the inflator/deflator accessory, pull
it away from the blower.
(FIG. 4)
(FIG. 5)
Fig. 4
Groove
Fig. 5
-10-
b
a
Raised Post
Rib
Groove