Port Information - Epson TM-T88V Series Development Manual

Make other settings in accordance with the settings described above.
When using with the power saving mode, set DIP-SW2-3 and DIP-SW2-4 to ON.
- TM-T88V with UB-B03
DIP-SW1
No. Setting
1
2
3
4
5
6
7
8
Set DIP-SW2-3 and DIP-SW2-4(Specification of the print density) to match the
environment of use.
Make other settings in accordance with the settings described above.
When using with the power saving mode, set DIP-SW2-3 and DIP-SW2-4 to ON.

2.3 Port Information

1) Port information when serial port is used
The port information that can be set with the SetupPOS utility is as follows.
Baud rate [bps]
Bit length [bit]
Parity
Stop bit [bit]
Handshake
The default settings are as shown in the following table.
OFF Fixed at OFF
OFF Fixed at OFF
OFF Fixed at OFF
OFF Fixed at OFF
OFF Fixed at OFF
OFF Fixed at OFF
ON Fixed at ON
ON Fixed at ON
Item
Item
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T88V)
DIP-SW2
No. Setting
1 OFF
2 OFF
3 OFF
4 OFF
5 OFF
6 OFF
7 OFF
8 OFF
Setting range
2400, 4800, 9600, 19200, 38400, 57600,
115200
8
NONE, ODD, EVEN
1
DTR/DSR
Setting range
6
Version 3.00 Feb. 2019
Settable
Fixed at OFF
Settable
Settable
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at OFF