Operation - ABSINA 52-231-1001 Operating Manual

OPERATION

Observe the operating instructions for the charging
station and the electric vehicle.
1. Switch off the vehicle. Go to parking mode.
2. Remove the protective caps from the charging
plugs and connect the infrastructure charging plug
to the infrastructure charging socket and the
vehicle charging plug to the vehicle inlet. Ensure
the correct assignment and check that the plug
connections are correctly and completely plugged
in.
1
3. Start the charging process at the charging station.
The charging plugs are automatically locked.
1
4. To end the charging process prematurely, follow
the operating instructions for the charging station.
5. After the charging process is finished, the
charging plugs are automatically unlocked.
6. Disconnect the charging plugs from the charging
station and the electric vehicle (EV must be
unlocked).
1
7. Put the protective caps on the charging plugs and
roll up the cable without kinks.
1
Start charging
WALLBOX
A
WALLBOX
RFID
A
RFID
1
1
End charging
WALLBOX
A
WALLBOX
RFID
A
RFID
1
1
SchuKo
SchuKo
2
2
2
Typ2 auf Typ2
2
Typ2 auf Typ2
2
2
2
2
Deutsch . English
3
3
3
3
3
3
3
3