B U L L E T I N
#3
BRAKE
#2
TRACTION
SHEAVE
#5 MACHINE
ROTOR &
BRAKE WHEEL
Codes and Standards
These machines are designed to comply with ASME A17.1/CSA B44 code. The motors are
designed with insulation class F minimum and have been approved by and carry a CSA
approved label.
Environmental Specifications
• Operating ambient temperature: 35° F to 104° F (1.7 C to 40 C)
• Humidity average of 90% non-condensing
Machine Specifications
• Traction Sheave (removeable) Diameter: 20 in or 25 in
• Main and emergency block brakes. Each capable of holding 125% of the load
• Brake switches, wired normally close standard
• Heidenhain ECN1313 2048 encoder and 1.5-meter-long cable (standard)
• Sheave guard/rope retainer
• Machine dimensions and parts list can be found at the end of this book.
# 1 1 9 4
G L V - 4 0 D 1
#4 SHEAVE
GUARD /
ROPE
RETAINER
Figure 3
Page 4-2
Rev. A - 04/01/2022
G E A R L E S S
T R A C T I O N
#1
PM MOTOR
HOUSING
M A C H I N E
#6
NAMEPLATE
#7
ENCODER