Summary of Contents for Sabik Marine carmanah 800 Series
- Page 1 800 SERIES LANTERNS USER MANUAL Technical Support: Email: customerservice@flashtechnology.com Toll Free: 1.800.821.5825 Fax: 1.615.261.2600 Web: sabik-marine.com 90464_8XX_User_Manual_RevG...
-
Page 2: Warnings & Precautions
This manual will familiarize you with the Cet appareil numérique de la classe [B] est features and operation standards of Sabik Marine’s 800 series lantern. conforme à la norme NMB-003 du Canada. Failure to comply with the use, storage, Changes or modifications not expressly... -
Page 3: Table Of Contents
Setting Night-to-Day Transition Level ....17 Enable/Disable Tap-to-Activate LED Display Option ..............18 Viewing Firmware Version........18 Enabling Telemetry ..........18 Setting the Synchronization Function (GPS or Wired-Sync equipped Lanterns Only) ....19 GPS Status (GPS-equipped Lanterns Only) ..19 ©2019 Sabik Marine, LLC... -
Page 4: Introduction
Marine GPS-equipped lanterns to flash in unison Optional Infrared (IR) LED lighting. Note: IR light is emitted only when device visible light is turned on. Optional secure satellite monitoring and status reporting (M800 lanterns only) ©2020 Sabik Marine... -
Page 5: Parts Description
800 series USER MANUAL PROGRAMMING Parts Description Bird deterrent Optics and lens LED display Visual color indicator Handle Solar panels (self-contained) or UV-resistant polycarbonate plate (standalone) Mounting holes (3 and 4-bolt patterns) Powder-coated aluminum frame ©2020 Sabik Marine... -
Page 6: Programming The Lantern
Once activated, the LED Display will show in sequence: Pre-Programmed Lanterns Lantern Status If Sabik Marine or an authorized distributor has Battery State of Charge & Battery Voltage programmed the lantern prior to you receiving it, it is ... -
Page 7: Summary Of Lantern States And Statuses
Disconnect (LVD) is engaged. Voltage Charge” Volt Indicates the real-time battery voltage “Setting the Flash Character.” Lantern Flash Displays the three-digit Flash Character reference Appendix A“ FLSH 001-273 Character number. includes a complete list of available options. ©2020 Sabik Marine... - Page 8 DD Calendar is enabled. Indicates the date the lantern will reactivate at the Calendar OFF mon MM CoFF end of a dated shutdown period. This field is only Date day DD visible when the Calendar is enabled. ©2020 Sabik Marine...
- Page 9 CBL2 wired-sync network) only) “Setting Day to Day to Night 025L- Indicates the ambient brightness (in lux) at which Transition Level Night Transition 400L the lantern LEDs will turn on in the evening. (D2N) Level” ©2020 Sabik Marine...
- Page 10 Infrared (IR) programmer is required to view LED Display lantern state and status. Option” The lower right decimal point on the LED display “Charging the Charging will flash regularly to indicate that the lantern is Lantern” charging. (Does not occur for the M840) ©2020 Sabik Marine...
-
Page 11: Using The Infrared (Ir) Programmer
Typically, three steady button presses will be sufficient; however, you may need to make more or fewer connection attempts to coincide with the lantern signal. The lantern LEDs will flash to ©2020 Sabik Marine... -
Page 12: Turning The Lantern On Or Off
2. The lantern LEDs will flash to confirm the lantern is ready to receive commands. 3. Press and hold the power button for approximately five seconds until the LED display changes to show “stAt On” or “byE”. ©2020 Sabik Marine... -
Page 13: Setting The Flash Character
Flash Characters. 6-1-3 CASA 10 cd (Part 133, Vol. 2)* Transport Canada CD-810 (Std. 6-6-6 621) * Code 613 satisfies the requirements of both CASA 10cd and ICAO Type A (Annex 14, Vol. 1, 5 Ed./2009). ©2020 Sabik Marine... -
Page 14: Setting Intensity Of Infrared (Ir) Output
Set the ALC programmed Flash Character. to off if your application demands Choose a lower value or modify that the lantern meets specific your Flash Character to resolve intensity requirements at all times. this issue. ©2020 Sabik Marine... -
Page 15: Setting The Calendar Function
8. Lock the new setting Confirm that the Calendar is turned “on”. 9. The lantern LEDs will flash to confirm your change. 1. Navigate to the Con menu 2. Scroll to the Month value (ΠΠon) 3. Unlock the existing setting ©2020 Sabik Marine... -
Page 16: Editing The Lantern Date And Time (Non-Gps Units Only)
6. Use the number keys to enter the current month. 7. Lock the new setting 8. Scroll to the Day value (dAY) 9. Use the number keys to enter the current day. 10. Lock the new setting ©2020 Sabik Marine... -
Page 17: Setting Day-To-Night Transition Level
The N2D Transition Level must be at least 50L greater than the D2N Transition Level. The D2N level will be automatically adjusted if required. ©2020 Sabik Marine... -
Page 18: Enable/Disable Tap-To-Activate Led Display Option
Specification Enter Key Sequence 7-2-8-1 Enable Telemetry 7-2-8-0 Disable Telemetry The lantern LEDs will flash to confirm that the new setting has been programmed. ©2020 Sabik Marine... -
Page 19: Setting The Synchronization Function (Gps Or Wired-Sync Equipped Lanterns Only)
4. Unlock the existing setting 5. Scroll to the desired setting “off”, “CTC”, “UTC”, “CTCL”, “CBL1”, or “CBL2”. 6. Lock the new setting 7. The lantern LEDs will flash to confirm that the new setting has been locked. ©2020 Sabik Marine... -
Page 20: Installing A Lantern
Adequate sunlight and suitable ambient temperature are the two most important factors to consider when choosing a location for Sabik Marine solar lanterns. Adequate Sunlight Most of the 800 series lanterns are powered by solar energy stored inside the rechargeable batteries of the lantern;... -
Page 21: Wired-Sync Enabled Lanterns
The M840 lantern will have the wired sync wires included as part of the power cable. If not using the wired sync function, simply terminate the wire ends safely using a wire nut Attaching the Bird Deterrent or similar device. ©2020 Sabik Marine... -
Page 22: Charging The Lantern (Self-Contained Only)
To place the lantern into Off mode, follow the “Turning the command sequence described in Step 2: Connect the Sabik Marine -supplied charger Lantern On or Off”. accessory to the charge port. Sunlight If available, sunlight is the easiest way to charge multiple lanterns. -
Page 23: Determining Battery State Of Charge (Self-Contained Only)
Note that the lantern may ship with one of three battery packs (60X, 96E or 200BC). Lantern voltages varies depending on the battery pack supplied. Battery Pack Nominal Voltage 6.3V 6.3V 200BC 8.4V ©2020 Sabik Marine... -
Page 24: Changing The Battery (Self-Contained Only)
CHARGING Changing the Battery (Self- Contained Only) Battery replacement kits can be ordered directly from Sabik Marine or from your authorized distributor. Multiple battery sizes are available. Consult the table below to match your 800 series lantern with an appropriate battery pack. - Page 25 40 inch lbs. 9. Place the lantern housing back over the battery pack and re-connect the battery harness. 10. Carefully turn the lantern on its side. Inspect the lantern to ensure that no wires or gaskets are pinched. ©2020 Sabik Marine...
-
Page 26: Changing The Battery (12V) (Self-Contained Only)
4. With the lantern in an upright position, slowly lift the housing away from the base plate. Battery replacement kits can be ordered directly from Sabik Marine or from your authorized When lifting the assembly from the distributor. base plate, the battery plug must be... - Page 27 14. Carefully turn the lantern on its side. Inspect the lantern to ensure that no wires or gaskets are pinched. 9. Remove the old black rubber gasket in the lantern base and replace it with the new one supplied. ©2020 Sabik Marine...
-
Page 28: Preparing The Lantern For Storage (Self-Contained Only)
If the battery is not fully charged, follow the charging instructions in this guide. Place the lantern in “off” mode using the IR programmer. Follow the instructions in this “Turning the Lantern On or guide in Off”. ©2020 Sabik Marine... -
Page 29: Warranty And Customer Service
To contact Flash Technology Customer Service: Phone: 1.800.821.5825 Additional Products Fax: 1.615.261.2600 Email: customerservice@flashtechnology.com Sabik Marine offers a variety of solar-powered and Web: flashtechnology.com energy-efficient LED lighting products and accessories. For more information visit sabik- marine.com. ©2020 Sabik Marine... -
Page 30: Appendix A: Flash Characters
Fl(2) 6s Fl(2) 6s Fl(2) 7s Fl(2) 8s Fl(2) 8s Fl(2+1) 10s Fl(2+1) 12s Fl(2+1) 12s Fl(2+1) 15s Fl(2+1) 6s Fl(3) 12S Fl(3) 10s Fl(3) 10s Fl(3) 12s Fl(3) 15s 10.7 Fl(3) 15s 10.5 Fl(3) 20s 12.5 ©2020 Sabik Marine... - Page 31 Fl 10s Fl 10s Fl 12s 10.8 Fl 15s Fl 2.5s Fl 2.5s Fl 2.8s Fl 2s Fl 2s Fl 2s Fl 2s Fl 2s Fl 2s Fl 3s Fl 3s Fl 3s Fl 3s Fl 4.3s ©2020 Sabik Marine...
- Page 32 ISO 10S ISO 2S ISO 4S ISO 5S ISO 6S ISO 8S ISO 3S LFL 10S LFL 10S LFL 10S LFL 12S LFL 15S LFL 5S LFL 6S LFL 8S LFL 8S MO(A) 10S MO(A) 15s MO(A) 6s ©2020 Sabik Marine...
- Page 33 MO(U) 15S*** 11.7 MO(U) 10S OC 10S OC 10S OC 15S OC 3S OC 3S OC 4S OC 5S OC 5S OC 5S OC 6S OC 6S OC 6S Q 1.2S Q 1.2S Q 1.2S Q 1S ©2020 Sabik Marine...
- Page 34 0.65 0.35 0.65 0.35 0.65 0.35 0.65 0.35 0.65 0.35 0.65 0.35 0.65 0.35 0.65 0.35 6.65 Q(9) 15S VQ 0.5S 0.15 0.35 VQ 0.5S VQ 0.6S VQ 0.6S VQ(3) 5S 0.15 0.35 0.15 0.35 0.15 3.85 ©2020 Sabik Marine...
- Page 35 Fl(3+1) 20 s 10.2 Fl(2) 7s Fl(3) 9s LFL 11s Fl(6+1) 15s Mo (0) 12s Mo (0) 15s Q 1S 0.25 0.75 Q (3) 4.6s Fl 7.5s Fl (4) 11s FL (3) 21s 13.5 FL (3) 6s ©2020 Sabik Marine...
- Page 36 Fl(2+1) 10s MO(U) 15S Q 1.2S Q(3) 10S Q(6)+LFL 15S VQ(3) 5S VQ(6)+LFL 10S VQ(9) 10S OC (3) 12S OC(4) 12S FL(3) 12S FL(4) 15S FL(5) 20S MO(A) FL(5) 20S SADO 11.5 FL(4) 15S FL(5) 20S Q(6)+LFL 15S ©2020 Sabik Marine...
- Page 37 CST9 56.7 CST10 CST11 CST12 CST13 CST14 CST15 CST16 CST17 CST18 10.5 CST19 CST20 CST21 Fl 3.5s Fl 3.6s Fl 5.5s Fl(3) 15s GpD(5) 14s GpD(5) 15s ISO 2.5S 1.25 1.25 Fl(3) 10s CST22 CST23 0.25 2.25 ©2020 Sabik Marine...
- Page 38 0.25 3.75 CST32 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 5.75 CST33 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 CST34 CST35 CST36 ©2020 Sabik Marine...
-
Page 39: Appendix B: Troubleshooting
“on” or “off” The lantern beam/LEDs The lantern is in a Change the do not turn off continuous demonstration mode (intended for distributor and factory use only) or the lantern is being used indoors under florescent lights. ©2020 Sabik Marine... - Page 40 Verify that all GPS equipped lanterns are set to the same flash not the same. code. No IR output on lantern Lantern is not an IR version Use a suitable device to view IR output. If no output is seen, contact customer service. ©2020 Sabik Marine...