Advertisement
Maintenance and cleaning
Switch the cooler off at the socket.
The cabinet must be periodically cleaned. Clean the external and internal surfaces
of the cabinet with a light soap solution and subsequently wipe dry. External
surfaces can be maintained using steel oil.
Do NOT use cleansers containing chlorine or other harsh cleansers, as these can
damage the stainless steel surfaces and the internal cooling system.
Clean the condenser and the compressor compartment using a vacuum cleaner and
a stiff brush.
Do NOT hose the compressor compartment with water as this can cause short
circuits and damage on the electrical parts.
Service
The cooling system is a hermetically sealed system and does not require
supervision, only cleaning.
If the cabinet fails to cool, check if the reason is a power cut.
If you cannot locate the reason to the failure of the cabinet, please contact your
supplier. Please inform model and serial number of the cabinet. You can find this
information on the rating label which is placed inside the cabinet in the top right
hand side.
Disposal
Disposal of the cabinet must take place in an environmentally correct way. Please
note existing regulation on disposal. There may be special requirements and
conditions which must be observed.
6
Advertisement
