Advertisement
Electrical connecting
The cabinet operates on 230 V/50 Hz.
The wall socket should be easily accessible.
All earthing requirements stipulated by the local electricity authorities must be observ
The cabinet operates on 230 V/50 Hz. The wall socket should be easily accessible.
cabinet plug and wall socket should then give correct earthing. If in doubt, contact yo
All earthing requirements stipulated by the local electricity authorities must be
supplier or authorized electrician.
observed. The cabinet plug and wall socket should then give correct earthing. If in
doubt, contact your local supplier or authorized electrician.
The flexible cord fitted to this appliance has three cores for use with a 3-pin 13-Amp
Amp plug. If a B.S. 1363 (13-Amp) fused plug is used, it should be fitted with a 13-A
The flexible cord fitted to this appliance has three cores for use with a 3-pin 13-
Amp or 3-pin 15-Amp plug. If a B.S. 1363 (13-Amp) fused plug is used, it should be
The wires in this mains lead are coloured in accordance with the following code:
fitted with a 13-Amp fuse.
Green/Yellow: Earth, Blue: Neutral, Brown: Live.
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow: Earth, Blue: Neutral, Brown: Live.
The main electrical connections must be done by skilled electricians.
The main electrical connections must be done by skilled electricians.
Start-up of the cabinet
Before use, we recommend that the cabinet is cleaned, see the section on
Before use, we recommend that the cabinet is cleaned, see the section on maintenance
maintenance and cleaning.
Important !
If the cabinet has been vertically placed during transport, please wait 2 hours before s
cabinet.
If the cabinet has been vertically placed during transport,
Connect the cabinet to a socket and turn on the switch on the control panel, see fig. 1.
Connect the cabinet to a socket and
turn on the switch on the control
panel, see fig. 1.0
The thermostat is placed in the control panel, see fig.
2.0.
The thermostat has been pre-set and in most cases it is
not necessary to adjust the settings.
When turning on the cabinet the display will show the
current temperature in the cabinet.
4
The cabinet operates on 230 V/50 Hz.
The wall socket should be easily accessible.
All earthing requirements stipulated by the local electricity authorities must
be observed. The cabinet plug and wall socket should then give correct
Electrical connecting
earthing. If in doubt, contact your local supplier or authorized electrician.
The flexible cord fitted to this appliance has three cores for use with a 3-pin
13-Amp or 3-pin 15- Amp plug. If a B.S. 1363 (13-Amp) fused plug is used,
it should be fitted with a 13-Amp fuse.
The wires in this mains lead are coloured in accordance with the following
code: Green/Yellow: Earth, Blue: Neutral, Brown: Live.
The main electrical connections must be done by skilled electricians.
Before use, we recommend that the cabinet is cleaned, (see the section on
maintenance and cleaning).
Start-up of the cabinet
If the cabinet has been vertically placed during transport,
please wait 2 hours before starting up the cabinet.
Thermostat
D e f r o s t e d w a t e r r u n s t o a c o n t a i n e r p l a c e d i n t h e c o m p r e
Thermostat
The thermostat is placed in the control panel, see fig. 2.0
t h e n r e t u r n t o n o r m a l o p e r a t i o n .
The thermostat is placed in the control panel, see fig. 2.0.
The thermostat is placed in the control panel, see fig. 2.0
Thermostat
4
Thermostat
The thermostat has been pre-set and in most cases it is n
m a n u a l l y .
adjust the settings. When turning on the cabinet the disp
Thermostat
c o n t e n t s o f t h e c a b i n e t i s c h a n g e d f r e q u e n t l y i t m a y b e c o
The thermostat is placed in the control panel, see fig. 2.0.
current temperature in the cabinet.
The thermostat is placed in the control panel, see fig. 2.0.
T h e c a b i n e t d e f r o s t s a u t o m a t i c a l l y w i t h p r e - s e t i n t e r v a l s
D e f r o s t i n g
The thermostat has been pre-set and in most cases it is n
The thermostat has been pre-set and in most cases it is no
When turning on the cabinet the display will show the cu
Thermostat
When turning on the cabinet the display will show the cu
' P 2 ' F l a s h i n g i n t h e d i s p l a y : i n d i c a t e s t h a t t h e e v a p o r a t o
Display set temperature:
The thermostat has been pre-set and in most cases it is not necessary to
Display set temperature:
The thermostat is placed in the control panel, see fig. 2.0.
Display set temperature:
When turning on the cabinet the display will show the current temperatu
The thermostat has been pre-set and in most cases it is no
' P 1 ' F l a s h i n g i n t h e d i s p l a y : i n d i c a t e s t h a t t h e c a b i n e t s e
Display set temperature:
When turning on the cabinet the display will show the cu
A l a r m c o d e s :
Start-up of the cabinet
please wait 2 hours before starting up the cabinet.
Important!
Connect the cabinet to a socket and turn on the
switch on the control panel, see fig. 1.9.
P r e s s i n g t h i s k e y c o n t i n u o u s l y f o r m o r e t h a n 3 s e c
p o s s i b l e .
T h i s d o e s n o t i n f l u e n c e t h e o p e r a t i o n o f t h e c a b i n e
T h e c a b i n e t w i l l s t r i v e t o k e e p t h e s e t t e m p e r a t u r e
Press this key and the display will show the set tem
Press this key and the display will show the set temp
key again to return to normal reading.
normal reading
Press this key and the display will show the set tem
Important!
Fig. 1.9
Thermostat
Fig. 2.0
Fig. 1.0
Fig. 2.0
Fig. 2.0
Fig. 2.0
Fig. 2.0
Advertisement
