Behringer EUROLIVE B205D Service Bulletin page 4

Loudspeaker Systems
EUROLIVE
B205D
Spread thermal grease on the backs of IC1, IC2, D5,
and D6. Carefully reinstall the PCB assembly back
into its metal enclosure.
Make sure all insulators are in place,
including two new ones for IC1 and IC2.
Reinstall the heatsink clip to diodes D5 and D6,
and tighten the screws.
Install the new heatsink clip to cover IC1 and IC2.
Tighten the screw and nut to securely hold the ICs
against the heatsink.
Reassembly is the reverse of disassembly. Make
sure all connections and screws are secure.
Perform a functional test and safety test to verify
the unit is working correctly.
MUSIC Group accepts no liability for any loss which may be suff ered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein.
Technical specifi cations, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK,
TURBOSOUND, BEHRINGER, BUGERA and DDA are trademarks or registered trademarks of MUSIC Group IP Ltd. © MUSIC Group IP Ltd. 2014 All rights reserved.
Confi dential, for internal use only. Not to be reproduced.