Advertisement
To Camera
We strongly recommend you connect all cameras and cables and check they are communicating and can
be seen on your monitor before permanent installation.
STEP 1: Connect your cameras:
cameras are to be used outside use the weatherproof covers to house the camera connection.
STEP 2: Connect a display
Connect a monitor or HDTV to
own VGA cable.
STEP 3: Connect USB mouse:
Connect the supplied USB mouse to either USB port
STEP 4: Powering up your device
Connect the power supply unit to the power input
Easy 5 Step guide
To NVR
Connect one end of
5
using the supplied HDMI cable or, if your monitor uses a VGA cable, to
7
.
and switch on with power switch
1
A
to a camera and the other to a LAN Camera input
4
9
using your
4
.
2
. If the
Advertisement
