Advertisement
This guide assumes a minimal standard installation using only the out-of-box cables and mounting aids. You will need to consider your specific installation
needs, such as distance between the NVR and cameras or internet router. You may need additional cables and/or equipment for your specific situation
which are available at your reseller.
Getting to know your NVR
Note:
Power Input
❶
Power Switch
❷
Audio Output
❸
VGA Monitor Port
❹
HDMI Monitor Port
❺
Reset Button
❻
USB Ports
❼
WAN Port
❽
9
LAN Camera Inputs
2
Connect 48V power supply.
Master power, turn on after
power connection.
Optional connection to an
amplifier or active speakers,
using an RCA connection.
To connect monitors that use a
VGA connection.
To connect monitors that use an
HDMI connection.
Manual reset button for the unit.
USB ports for mouse or thumb
drive to share videos.
Connect to your network router
using supplied short RJ45
Ethernet cable.
Connect cameras using the
supplied long RJ45 cables.
Advertisement
