Advertisement
Quick Links
Advertisement
Related Manuals for Gannet Pro
Summary of Contents for Gannet Pro
- Page 1 Gannet Pro Remote Controller...
- Page 2 Controls; Top left outer button, Lock/ Unlock image. Bait release. (picture above) This button will release the electronic release system on flipping the switch. (PLEASE ensure that you set the mechanical safety to the correct weight prior to flying for your drone’s safety.) Top left inner button, Teardrop image.
- Page 3 RTH; return to home position, this will cause the drone to climb to the preset RTH height and the fly to the take off position, hover and auto land. (PLEASE note this is an emergency use only, it is not recommended by Gannet or DJI (NAZA) as the normal way to return your drone after a drop.) Top right inner button;...
- Page 4 In home lock flying, the forward direction is the same as the direction from home point to multi- rotor. All the following requirements are met: 6 or more GPS satellites are found, in GPS ATTI. Mode, and the aircraft is further than 10m away from the home point. Normal flying Home Lock Flying Control sticks;...
- Page 5 This shows: Signal G: Number of satellites B: Drone battery voltage T: Transmitter battery voltage Distance: Distance from takeoff point Height: Height from takeoff point Lat/Lon: current geographical position. If you press the power button twice you will get the screen below to show you servo positions, this is a test only screen and is only to show that the signals for each channel are correct.