Related Manuals for Gannet Pro
Summary of Contents for Gannet Pro
- Page 1 GANNET User Manual PRO AND LITE FORMATS GANNET CC Website: www.dronefishing.com Support: hello@dronefishing.com Tel: +27 21 001 8852 Address: Unit 12A WAVERLY BUSINESS PARK, WYECROFT ROAD MOWBRAY CAPE TOWN SOUTH AFRICA...
- Page 2 South Africa. LIABILITY 4.1. We, i-Arc cc T/A Gannet, the manufacturer and distributor of this drone, disclaim all liability from the operation of the drone resulting in – 4.2. collision with other aircraft.
- Page 3 Propeller safety The Gannet Pro’s propeller is very hard and very sharp. The material of their composition is carbon fibre. This material makes the propeller has a high strength and improves the flight of the quad copter.
-
Page 4: Long Battery Life
Stable and reliable waterproof kit (Gannet Pro Versions) GANNET PRO’s are equipped with a high-stability waterproof kit to prevent rain, dust, and the like from entering the interior of the aircraft, effectively solving the problem that conventional aircraft cannot work in water. -
Page 5: Component List
Component List Components List Breakdown GANNET PRO / LITE / PRO PLUS waterproof aircraft host (including optional XS Release + optional camera) 10-channel 2.4GHz digital remote controller 150W smart balance charger 12’’ / 13” / 15” quick release self-locking propeller ... - Page 6 Warnings: Battery: NEVER store the battery fully charged or flat. If used the bring the voltage up with your charger to the storage level of 15,1V- 15,4V. If charged fully and not used you will have to discharge the battery to 15,1V- 15,4V either by flying the drone or by using the discharge function on the charger, flying even just hovering can achieve this the fastest.
- Page 7 Drone: Installing the Propellors, always ensure that the correct propellors is installed on the correct motors, they are match marked with either no markings as for Front Right and Back Left or with circles as for the Front Left and Back Right motors ...
- Page 8 If the drone starts to move in slow circular movements it can indicate that the compass calibration is not optimal for this position, you can land and recalibrate it a short distance away to reduce possible interference. Also note that telephones and smart watches can cause interference and should be kept away from the drone during calibration, ...
- Page 9 Always disconnect the battery when packing away the drone this is to avoid accidentally powering the drone on and discharging the battery completely, If the drone stops responding to any command and just hovers in place, switch the remote off completely, this will activate RTH and the drone should return home unless there is severe interference preventing this, ...
- Page 10 GANNET LITE The remote control has been coded with the receiver of the aircraft at the factory, and the parameters have been debugged. If it is not necessary, please do not modify the settings of the remote control and not touch the fine-tuning buttons of each channel of the remote controller.
- Page 11 This chapter will guide you to familiarize and assemble the Gannet and learn more about the flight characteristics of the Gannet. It is recommended that you read this chapter carefully and follow the steps in this section to prepare for the Gannet before flight.
- Page 12 Propeller installation Install the intact propeller onto the Gannet Pro aircraft as shown below Propeller with silver mark installed with accompanying white mark on motor. No mark on the alternate propeller. Note that the white mark on the arm which can distinguish the front direction of quadcopter.
-
Page 13: Led Indicators
LED indicators 1) Turn on the remote controller first, then turn on the GANNET PRO power. shake Gannet PRO when system initializing, before indicator turn... -
Page 14: Compass Calibration
Compass Calibration Be sure to calibrate the compass when you are flying for the first time or changing a flight area. When calibrating, please make sure the surrounding area is relatively empty, away from strong magnetic environment, such as magnetic field, high voltage line, parking lot, building area with underground steel bars etc Do not carry magnets with you when calibrating, such as keys, mobile phones etc. - Page 15 Introduction of motors start/stop Pushing the throttle directly before take-off will not start the motor. Please turn the control mode switch to the attitude mode position, keep the body stationary (7 seconds), and perform any of the following four mast actions to start/stop the motor. If the attitude mode/GPS mode, if the throttle is not pushed to more than 10% after stating the motor through the mast action, the remote controller will automatically enter the landing judgment, and will automatically stop after about 3 seconds.
- Page 16 If you turn on the IDC function, be sure to know the flight forward (heading locked flight) and the return point (the return point locked flight). INTELLEGANT OREINTATION MODE OFF (IOC) COURSE LOCK HOME LOCK ATTI MODE RETURN TO HOME...
- Page 17 There are two methods of automatic recording and manual recording for recording the forward and returning points of the flight, and one of them can be used. When the heading/return point is recorded, the LED is successfully recorded with flashing green light. Switch description Switch...
- Page 18 Remote Control Instructions The aileron controls the flight to the left / right mode /mocle The direction axis controls the left/right rotation of mode 1/mode Charger Charger introduction Charging steps Power on the charger, and connect it as shown in the picture Adjust the charger’s menu and set the correct parameters:...
- Page 19 Flight Control System Type: DJI-NAZA-M-V2 / DJI NAZA LITE (GANNET LITE VERSION) Working temperature: -10°CZ 50°C Adjustment system requirements: Windows XP sp3/ Windows 7 I Windows 8 Flight Characteristics Hover precision (GPS mode): vertical direction: +/- 0.8m horizontal direction: +/- 2.5m Maximum tail rudder angular velocity : 200°...