Lenovo IDEAPAD S10 User Manual page 30

S9-S10 User Guide V1.0_en.book Page 22 Wednesday, July 23, 2008 5:53 PM
Chapter 2. Using Your Computer
Changing or Removing the Supervisor Password
To change the password, do the following:
1
Select Set Supervisor Password, and press the Enter key. The Set
Supervisor Password window opens.
2
Select Enter Current Password and type in the correct password. Then
press Enter key once to move to Enter New Password field, type a new
supervisor password in.
3
Press the Enter key once to move to the Confirm New Password field.
Retype the password you just entered to verify it.
4
Commit your password to memory, and press the Enter key.
To remove password, do the following:
1
Select Set Supervisor Password, and press the Enter key.
2
Select Enter Current Password and type in the correct password, and
press the Enter key thrice.
Note:
Make sure the Password on boot is set to Enabled if you need the
password protection at power on.
22