Lenovo IDEAPAD S10 User Manual page 28

S9-S10 User Guide V1.0_en.book Page 20 Wednesday, July 23, 2008 5:53 PM
Chapter 2. Using Your Computer
Using Passwords
Using passwords helps prevent your computer from being used by others.
Once you set a password and enable it, a prompt appears on the screen
each time you power on the computer. Enter your password at the prompt.
The computer cannot be used unless you enter the correct password.
Make sure that only authorized individuals access your computer.
Establishing different kinds of passwords requires that other possible users
know the proper passwords in order to access your computer or your data.
Two passwords might be needed for your computer: the Supervisor
password, and the User password. When the Supervisor password is set,
only the Supervisor password entitles you full control of the computer.
Supervisor password
With a Supervisor password, you can get full control of the computer. It
also can be used as a power-on password if Password on boot is set to
Enabled. Also, when you enter the BIOS Setup Utility with a Supervisor
password, you are entitled to set all of the options.
User password
If a User password is set and Password on boot is set to Enabled, a
password prompt appears when you turn on the computer.
Unauthorized users cannot get access to configuration data. You can also
use the User password to enter the BIOS Setup Utility, but only a part of
the options can be set. User password can not be set if Supervisor
password is not set.
20