1100 Fan Assembly - Lenovo IDEAPAD S10-3S Hardware Maintenance Manual

IdeaPad S10-3s Hardware Maintenance Manual

1100 Fan assembly

For access, remove this FRU:
• "1010 Battery pack" on page 34
• "1020 Dummy cards" on page 35
• "1040 Keyboard" on page 37
• "1050 Base cover" on page 39
Figure 10. Removal steps of fan assembly
Note: Remove two screws and detach one connector in the direction shown
1
by arrow .
2
1
1
2
When installing: Make sure that the fan connector is attached firmly to the
system board.
Step Screw (quantity) Color Torque
M2 × 3.5 mm, flat-head, nylok-coated (2) White 1.6 kgfcm
1
48