Flymaster LIVE DS Manual page 6

Do not delete or manipulate any files in the SD card
directly. All SD card management tasks must be done
through Flymaster Instrument Manager. Not doing so,
may cause the instrument to malfunction. To copy some
file from SD card to your computer, you must use your
computer's file explorer using the USB connection with
the instrument.
Throughout this guide, we'll refer to the Enter/confirm
operation just as Enter. This can always be done using
the Enter/mark key or pushing down the scroll wheel.
Power ON - Press Power button and confirm with Enter/Mark button.
Power OFF - Press Power button. Choose yes using the cursor keys in the
pop-up menu, and press Enter.
Navigate in main menu - Use Scroll wheel or cursor/pan keys to
switch between menu icons. Push Enter to confirm. Use Menu/esc to go back.
Navigate in list type menu - Use Scroll wheel to navigate up and
down in the list type menu. Push Enter to confirm. Use Menu/esc to go back.
Set volume - Long Press Zoom 0ut / sound adjustment, use up and down
in cursor to change between vario sound and speaker volume, use scroll wheel
to change the setting , push down scroll wheel to confirm.
Check GPS Status - Selecting "Settings" in the main menu, without
pressing Enter, the GPS status will appear in the monochrome display.
Calibrate compass - Use Scroll wheel or cursor/pan keys and go to
"Settings". Push Enter to enter settings. Choose "calibration" using scroll
wheel in the monochrome and press push Enter to enter calibration mode.
Follow the colour display indications and turn the instrument in all four axis
until calibration is done.
Setting SOS and Report back messages - After logging into
your user account, click on "devices" in the left sidebar. Choose your instru-
ment, click on "actions" -> "messages"
Setting volume - On any page, "long press" the "Zoom-out/Sound ad-
justment" key. Use up and down cursor keys to change between "vario sound"
and "volume sound (voice assistance). Change the setting using the scroll
wheel and push wheel down to confirm.
Test Vario sound - Press Menu -> Settings -> Vario Acoustics -> Auto
Silent. Set Auto Silent to OFF. Push Enter to accept.
Set altimeter - Press Menu -> Settings -> Set Altimeter > Push scroll
wheel to edit the QNH or Altitude. Use Scroll wheel to change values. Use
cursor keys or scroll wheel to move to "save" or "cancel". Push Enter to set
the value.
Hardware reset - Press both Power button and Wheel down at same
time and release. The instrument should turn off. Press power button to turn
it on again.
Getting started
6