Page 3
Grazie per aver scelto un nostro prodotto Informazioni prodotto Lettore codice a barre USB plug & play in grado di leggere tutti i codici a barre standard 1D quali UPC-A, UPC-E, EAN-13/JAN-13, ISBN/ISSN, EAN-8/JAN-8, code 39, code 32, code 98, code 128, interleaved 2 di 5, industrial 2 di 5, MSI/Plessy e Codebar. Contenuto della confezione n°1 Lettore codice a barre n°1 Cavo...
Page 4
Descrizione prodotto Indicatore luminoso Cover resistente agli urti Tasto scansione Foro estrazione cavo Connessione dello scanner Collegare il cavo USB ad una porta USB del computer Note : Per scollegare il cavo USB dallo scanner di codici a barre, inserire un oggetto sottile come una graffetta piegata nel piccolo foro sopra il connettore ed estrarre contemporaneamente il cavo USB dalla presa.
Page 5
Angolo di lettura - Posizionare la pistola leggermente angolata rispetto al codice da leggere. - L’angolo tra codice e pistola non deve essere 90°. - Lo scanner deve mirare al codice a barre e il fascio deve coprire l’intero codice a barre.
Page 6
Grado IP Temperatura 0 a 50°C / 32 a 122 °F temperatura stoccaggio Operativa Umidita’ Stoccaggio 20 – 85% ( in assenza di condensa ) Protezione Esd 15kv scariche in aria Resistenza Agli Urti 1.5m su superfici lisce Settaggio funzioni...
Page 24
Dichiarazione di conformità Conformità alle Direttive Europee Con il marchio CE, Mach Power® garantisce che il prodotto è conforme alle norme e direttive europee richieste. Smaltimento del Prodotto In conformità alla normativa WEEE, le apparecchiature elettriche ed elettroniche non devono essere smaltite con i rifiuti domestici. Il presente prodotto deve essere consegnato ai punti di raccolta preposti allo smalti- mento e riciclo delle apparecchiature elettriche ed elettroniche.
Page 25
Thanks for choosing our product Product Information USB plug & play barcode reader capable of reading all standard 1D barcodes such as UPC-A, UPC-E, EAN-13 / JAN-13, ISBN / ISSN, EAN-8 / JAN-8, code 39, code 32, code 98, code 128, interleaved 2 on 5, industrial 2 on 5, MSI / Plessy and Codebar. Package Contents n°1 Barcode reader n°1 Cable...
Page 26
Product description Light Indicator Impact resistance cover Scan button Cable extraction hole Scanner connection Connect the USB cable to a USB port on the computer Note : To disconnect the USB cable from the barcode scanner, insert a pin such as a folded paper clip into the small hole above the connector and pull the USB cable out of the socket at the same time.
Page 27
• Hold the reader unit horizontally with respect to the bar code. • Each time you turn it back on, check the settings to prevent false result Reading Angle - Position the scanner slightly angled with respect to the code to be read. - The angle between the code and the scanner must not be 90 °.
Page 28
Material ABS + TPE + PC Power Supply DC 5v+-5% 50ma ((in operating mode); 30ma (standby mode); 100ma Operating Current (maximum consumption) 20ma(at rest) IP Degree Use Temperature 0 a 50°C / 32 a 122 °F storage temperature Storage Humidity 20 –...
Page 46
Declaration of Conformity Compliance with European Directives With the CE sign, Mach Power® ensures that the product is conformed to the basic European standards and directives Product Disposal This product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste.
Page 48
Per qualsiasi informazione ed aggiornamento sul prodotto > www.machpower.it visita il nostro sito Mach Power è un marchio registrato ® Tutti i diritti riservati...