Index Product information Package content Warnings and Precautions Restore factory default setting Reading version information Interface configuration Scanning Mode Setting Auto-sensing Mode LED light setting Aiming light setting Sound Indicator Sound Volume Language setting Virtual keyboard setting Bar code types reading ability configuration Reading 1D white barcode on black background Reading 2D white barcode on black background Ending character configuration...
Product information USB plug & play barcode reader capable of reading all standard 1D e 2D barcodes such as: Codebar, Code11, Code39/Code93, UPC/EAN, CODE128/CODE32, EAN128, InterLeaved 2 of 5, Matrix 2of 5, MSICODE, Standard 2 of 5, QR CODE Package content n°1 Barcode Reader n°1...
Page 5
• Do not observe directly or with optical instruments! • The product is not a game. Keep this product away from children and pets. • Do not leave packaging material unattended. It could turn into a dangerous toy for children. •...
Page 6
or a specialist workshop. • If you have further questions that are not answered in these instructions for use, contact our technical customer service or other specialists. Note : To disconnect the USB cable from the barcode scanner, insert a pin such as a folded paper clip into the small hole above the connector and pull the USB cable out of the socket at the same time.
Restore factory default setting Scan below Qr setting code, the scanner will be restored to factory setting. Default Configuration Interface Operating way Manual Trigger Ending character Enter Reading version information Scan below Qr code, to get version information of this scanner. Interface configuration USB interface When you want to connect the scanner with devices by USB cable, you scan below...
Page 8
QR code to configure the scanner for standards keyboard mode USB COM (Virtual COM) When you want to connect the scanner with devices by USB cable, you cloud scan below QR code to configure the scanner for virtual COM output mode (it will need driver, please contact your supplier to make the driver installation) COM (RS-232) When you want to connect the scanner with devices by RS-232 interface, you need to...
Scanning Mode Setting Manual trigger Push the trigger button to start reading, release the trigger button to end reading. Continuous Scanning Mode Scan below QR Code, the scanner becomes continuous scanning mode to work, no need manual trigger operating. Auto-sensing Mode Scan below QR code, the scanner enters into auto-setting mode.
configuration as follow according to application circumstance Normal mode (default): The light works on only when the scanner is reading The light is working ON always: the light is always ON once the scanner is power ON The light is working OFF always: the light is always OFF under any circustance Light ON (reading) Light OFF (Always) Light ON (Always)
Sound Indicator Scan below QR code to turn ON/OFF the soud indicator Sound Volume There are three options for sound volume High (Default) Medium Language setting Due to different output characters in different countries, it will need to configure the keyboard language accordingly.
Italian Japanese French Russian Virtual keyboard setting Under virtual keyboard circumstance, the devide could output correct information even by any language keyboard mode. When use virtual keyboard when use virtual keyboard, please be sure the small numbers keyboard is working (Default is standard) Standard Keyboard Virtual Keyboard...
Bar code types reading ability configuration Scan below QR code to allow or forbid reading certain type of bar code. But in this situation (read all 1D / 2D bar code), the spees of decoding may slow down. It is better to choose the code types that you need to improve the deconding speed.
Ending character configuration User could configure the ending character by scanning below different QR codes No Encoding Character CR+LF CR+CR STX and ETX configuration (before this setting, you need cancel ending character) Scan below QR code to make the STX and ETX configuration accordingly Forbidden STX Prefix...
Page 21
Indice Informazioni prodotto Contenuto della confezione Avvertenze e Precauzioni Ripristinare impostazioni di fabbrica Informazioni Versione Configurazione Interfaccia Impostazione modalità di scansione Modalità rilevamento automatico Impostazione LED Impostazione puntatore Avviso di lettura avvenuta con successo Volume audio Impostazioni lingua Impostazione tastiera virtuale Configurazione lettura diversi tipi di codici a barre Lettura codice 1D bianchi su sfondo nero Lettura codice 2D bianchi su sfondo nero...
Informazioni prodotto Lettore codice a barre USB plug & play in grado di leggere tutti i codici a barre stan- dard 1D e 2D quali: Codebar, Code11, Code39/Code93, UPC/EAN, CODE128/CODE32, EAN128, InterLeaved 2 of 5, Matrix 2of 5, MSICODE, Standard 2 of 5, QR CODE Contenuto della confezione n°1 Lettore codice a barre...
Page 23
- Non osservare direttamente o con strumenti ottici! • Il prodotto non è un gioco. Tenere questo prodotto lontano da bambini e animali domestici. • Non lasciare incustodito il materiale di imballaggio. Potrebbe trasformarsi in un pericoloso giocattolo per i bambini. •...
Page 24
un esperto o a un’officina specializzata. • In caso di ulteriori domande a cui non viene data risposta in queste istruzioni per l’uso, rivolgersi al nostro servizio clienti tecnico oppure ad altri specialisti. Nota: Per scollegare il cavo USB dallo scanner di codici a barre, inserire un oggetto sottile come una graffetta piegata nel piccolo foro sopra il connettore ed estrarre contemporaneamente il cavo USB dalla presa.
Ripristinare impostazioni di fabbrica Scansionare il QR per rispristinare le impostazione di fabbrica. Configurazione default Interfaccia Modalità di scansione Manuale Carattere finale Invio Informazioni Versione Scansionare il codice QR per informazioni sulla Versione Configurazione Interfaccia Interfaccia USB Per utilizzare lo scanner in modalità USB si prega di collegare il cavo e scansionare il...
Page 26
codice QR di seguito USB COM (Virtual COM) Per utilizzare lo scanner in modalità USB COM si prega di collegare il cavo e scansio- nare il codice QR di seguito. (sono necessari i driver, contattare il proprio rivenditore). COM (RS-232) Per utilizzare lo scanner in modalità...
Impostazione modalità di scansione Scansione Manuale Premere il pulsante per effettuare la scansione del codice, rilasciare per terminare. Scansione continua Scansionare il codice QR per attivare la scansione continua. Modalità rilevamento automatico Scansionare il codice QR per abilitare la modalità di rilevamento automatico Impostazione LED Il Led posto sullo scanner migliora la lettura dei codice.
Modalità normale (default): Il led si accende solo quando lo scanner legge i codici Modalità sempre attiva: Il led è sempre acceso quando il lettore è in funzione Modalità sempre spenta: Il led sarà sempre spento Modalità Normale Modalità sempre attiva Modalità...
Avviso di lettura avvenuta con successo Scansionando “Attivo” lo scanner emetterà un suono ad avvenuta acquisizione del codice. Scansionando “Spento” lo scanner non emetterà nessun suono. Attivo Spento Volume audio È possibile scegliere tre diversi livelli di volume dell’audio Alto (Default) Medio Basso Impostazioni lingua...
Italiano Giapponese Francese Russo Impostazione tastiera virtuale Con la tastiera virtuale, il dispositivo può inserire le informazioni in diverse lingue. Quando la tastiera virtuale è attiva, assicurarsi che la tastiera con i piccoli numeri funzioni. Di default è attivo standard. Tastiera standard Tastiera virtuale...
Configurazione lettura diversi tipi di codici a barre Scansionare i seguenti codici a barre per abilitare o disabilitare i diversi tipi di codice a barre. Se è attiva la funzione leggere tutti i codici 1D/2D, la velocità di scansione potrebbe risultare più lenta. E’ consigliabile scegliere il tipo lettura a seconda della necessità.
Configurazione carattere finale È possibile configurare il carattere finale tra i QR seguenti Nessun carattere finale CR+LF CR+CR Configurazione STX e ETX (Prima di abilitare, eliminare il carattere finale) Scansionare i seguenti QR code per abilitare STX e ETX Disabilita Prefisso STX...
Page 38
For any information and product updates > visit our website www.machpower.it Mach Power® is a registered trademark All rights reserved REV1-090421...