Lanner electronics FW-7890 Series User Manual page 40

On-Chip (Primary/Secondary) PCI IDE : The Intel 82C440BX chipset
contains a PCI IDE interface with support for two IDE channels. Select Enabled to
activate the primary and/or secondary IDE interface. Select Disabled to deactivate
this interface, if you install a primary and/or secondary add-in IDE interface.
On-Chip Serial ATA
This item allows you to configure your serial ATA devices if present.
Disabled
Auto
Combined
Mode
Enhanced
Mode
SATA First
Note. The items SATA mode, Serial ATA Port0 Mode, and Serial ATA Port1
Mode are configurable only when the ON-Chip Serial ATA item is not set to
[Disabled].
Serial ATA Port0 Mode
Onboard Device : Scroll to this item and press <Enter> to view the following screen:
USB Controller: Select Enabled if your system contains a Universal Serial Bus
(USB) controller and you have USB peripherals
USB 2.0 Controller
Disable this function if you are not using onboard USB 2.0 feature.
Enabled
Disabled
USB Keyboard Support : Select Enabled if your system contains a Universal
Serial Bus (USB) controller and you have a USB keyboard.
Disable SATA controller.
Auto arrange by BIOS.
PATA and SATA are combined. Max.of 2 IDE drives in each
channel.
Enabled both SATA and PATA. Max.of 6 IDE drives are
supported.
SATA is operating in legacy mode.
Primary Master
Primary Slave
Secondary Master
Secondary Slave
P-SATA master
S-SATA master
Enable USB 2.0 Controller.
Disable USB 2.0 Controller.
Remap SATA Port 0 to IDE Pri. Master.
Remap SATA Port 0 to IDE Pri. Slave.
Remap SATA Port 0 to IDE Sec. Master.
Remap SATA Port 0 to IDE Sec. Slave.
Remap SATA port 0 to P-SATA Master.
Remap SATA port 0 to S-SATA Master.