File : UniSled User Guide Version : V1.1 Table of content Product introduction ......................... 3 Introduction ........................3 Precaution before using battery ..................3 Charger..........................4 Notes ..........................4 Installation instruction ......................5 Appearance ........................5 Battery charge ........................6 Buttons and function area display ..................
It adapts to any smartphone running under Android or iOS. Connect your device and the UniSled very easily in a Bluetooth connection. The UniSled has several features such as powerful UHF RFID reading/writing and 1D/2D barcodes scanning.
File : UniSled User Guide Version : V1.1 Charger The charger type is GME10D-050200FGu, output voltage/current is 5V DC/2A. The plug considered as disconnect device of adapter. Notes Note 1: Using the incorrect type battery has danger of explosion. Please dispose the used battery according to instructions.
By using USB contact, the original adaptor should be used for charging the device. Make sure not to use other adaptors to charge the device. Buttons and function area display Unisled has 1 power button and 3 indicating lamps. 6/17 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE –...
File : UniSled User Guide Version : V1.1 3 Demo Test Install demo-uhf-bt (1.0.8) 1. Copy demo-uhf-bt (1.0.8.) into internal storage of smartphone. 2. Click to install. 3. Click to open demo. 7/17 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
File : UniSled User Guide Version : V1.1 Pairing device 1. Switch on Bluetooth function of smartphone or MBA5-P1x device. 2. Power on Unisled. 3. Click BLUETOOTH in the demo. 4. Click SEARCH to search for Nordic_UART_CW. 5. Click Nordic_UART_CW to connect.
Version : V1.1 UHF Scan function 1. Click SINGLE or AUTO in demo or pull the trigger on UniSled, the UHF tags could be read. 2. Click STOP in demo to stop reading of UHF tags. 3. Click CLEAR to clean all EPC information.
File : UniSled User Guide Version : V1.1 UHF configuration Click CONFIG in demo to adjust working mode and output power. 10/17 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
Page 11
File : UniSled User Guide Version : V1.1 11/17 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €...
File : UniSled User Guide Version : V1.1 UHF Tag Reading and Writing The storage of one tag has 4 zones: RESERVED, EPC, TID and USER. Normally, the default password is 00000000. And TID zone can only be read, other zones can be read and written.
File : UniSled User Guide Version : V1.1 UHF Tag Lock and Kill 3.6.1 Lock Function For example. User could try to lock down EPC zone. 13/17 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
File : UniSled User Guide Version : V1.1 3.6.2 Kill Function Kill function can be used to kill the tag permanently. Input the correct access password and click kill. 14/17 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
File : UniSled User Guide Version : V1.1 Firmware Upgrade 1. Click CHOOSE FILE. 2. Click SELECT the file in the internal storage. 3. Click UPGRADE to upgrade firmware. 15/17 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
File : UniSled User Guide Version : V1.1 Barcode Scan Test Select BARCODE SCAN in the demo and click SCAN button on the screen to scan barcodes. Click CLEAR to clean all information 16/17 AXEM Technology 11 rue Auguste Perret, 94042 Créteil, FRANCE – info@axemtec.com – +33 (0)1 41 94 11 85 – www.axemtec.com...
File : UniSled User Guide Version : V1.1 4 Device characteristics Physical characteristics Weight 445g Color Black Appearance material Plastic Product material Plastic Battery specification 2600mAh/5200mAh Indicator LED Power, Work, Bluetooth Buzzer Support Interfaces IMicro-USB Performance Cortex-M3/72 MHz RAM+ROM 64M+4G...
Need help?
Do you have a question about the UniSled and is the answer not in the manual?
Questions and answers