Table of Contents
Advertisement
English
Intended Use
This cordless handheld blower is designed for professional
blowing applications.
DO nOT use under wet conditions or in presence of
flammable liquids or gases.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
ASSEMBLY AND ADJUSTMENTS
WARNING:
serious personal injury, turn unit off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories. An accidental start-up can cause injury.
Blow Tube Assembly (Fig. D)
WARNING:
without tube securely in place. Never reach down into
housing through tube hole.
WARNING:
when you leave blower unattended or when storing,
checking, adjusting, cleaning, or working on blower.
1. To attach the blower tube
the peg
8
of the power head with the notch
blower tube opening as shown in Fig. D.
2. Push the blower tube onto the power head until the
tube locks engage the blower tube and an audible click
is heard.
3. Pull on the tube to ensure it is securely in place.
4. To remove the tube, insert a screwdriver into the
unlocking hole
10
on the side of the blower tube.
Depress the tab inside and pull tube off.
Fig. D
4
9
8
Concentrator Assembly (Fig. E)
Use the concentrator
7
attachment to target air flow to a
tighter area.
1. Align the concentrator
shown in Fig. E.
8
To reduce the risk of
Do not operate blower
Always remove the battery
4
to the power head, align
9
10
7
with the tube assembly as
2. Slide the concentrator
3. Push down until the tabs
tube engage the locking holes
concentrator
4. Pull on the concentrator
place.
5. To remove the concentrator
pull the concentrator
Fig. E
OPERATION
WARNING:
of the
serious personal injury, turn unit off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories. An accidental start-up can cause injury.
WARNING:
without blow tube securely in place. Never reach down
into housing through tube hole.
WARNING:
glasses. Wear a filter mask if the operation is dusty.
Use of rubber gloves and substantial footwear is
recommended when working outdoors. Keep long hair
and loose clothing away from openings and moving
parts. FOR HOUSEHOLD USE ONLY.
WARNING:
the tool off, wait 10 seconds for the fan to stop
rotating before removing the blower tube.
•
Always ensure the blower is switched OFF and the
battery is removed when:
-
You leave blower unattended.
Clearing a blockage.
-
-
Checking, adjusting, cleaning or working on blower.
•
Only use blower in daylight or good artificial light.
7
onto the tube
11
on both sides of the
12
in both sides of the
7
.
7
to ensure it is securely in
7
, depress the tabs
7
away from the tube.
7
12
To reduce the risk of
Do not operate blower
Always wear safety
Cut Hazard. When turning
4
.
11
and
11
Hide quick links:
Advertisement
Table of Contents
